text.skipToContent text.skipToNavigation

Référence fabricant

25LC160BT-E/ST

25LC160B Series 16 Kbit (2K x 8) 5.5 V SMT SPI Bus Serial EEPROM - TSSOP-8

Modèle ECAD:
Nom du fabricant: Microchip
Emballage standard:
Product Variant Information section
Code de date:
Product Specification Section
Microchip 25LC160BT-E/ST - Caractéristiques techniques
Attributes Table
Style d'emballage :  TSSOP-8
Méthode de montage : Surface Mount
$Fonctionnalités et applications

Note: Not Recommended for new design

The 25LC160A/B (25XX160A/B*) series of16 Kbit Serial Electrically Erasable PROM is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input.

Communication to the device can be paused via the hold pin (HOLD). While the device is paused, transitions on its inputs will be ignored, with the exception of Chip Select, allowing the host to service higher priority interrupts. The 25XX160A/B is available in standard Pb-free packages including 8-lead PDIP and SOIC, and advanced packaging including 8-lead MSOP, and 8-lead TSSOP.

Features:

  • Max. Clock 10 MHz
  • Low-Power CMOS Technology
  • 2048 x 8-bit Organization
  • 16-Byte Page (‘A’ version devices)
  • 32-Byte Page (‘B’ version devices)
  • Write Cycle Time: 5 ms max.
  • Self-Timed Erase and Write Cycles
  • Block Write Protection:
    • Protect none, 1/4, 1/2 or all of array
  • Built-In Write Protection:
    • Power-on/off data protection circuitry
    • Write enable latch
    • Write-protect pin
  • Sequential Read
  • High Reliability:
    • Endurance: 1,000,000 erase/write cycles
    • Data retention: > 200 years
    • ESD protection: > 4000V
  • Temperature Ranges Supported:
    • Industrial (I): -40°C to +85°C
  • Pb-Free and RoHS Compliant

Learn more about the 25LC160 family of EEPROM

Pricing Section
Stock globale:
États-Unis:
0
Prix Internet:
USD Chaque
Total 
USD

$7.00 les frais d’enroulage sont amortis par le nombre de composants pour chaque bobine.
Les mini-bobines sont des produits personnalisés et ne peuvent pas être annulés ou remboursés.

Product Variant Information section