Manufacturer Part #
AMPSEAL 14 Position 4 mm Pitch Triple Row Wire to Board Right Angle Header
|Mfr. Name:||TE Connectivity|
|Standard Pkg:|| |
Product Variant Information section
36 per Tray
AMPSEAL Sealed Connector System - Header Assembly Description of Changes: The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to the AMPSEAL Header Assembly Customer Drawing notes and dimensions for the part number(s) listed in this notice.These PNs are TE proprietary designs, therefore considered catalog/general market product. TThe change does not affect Form Fit or Function of the AMPSEAL Headers. This change is for notification purposes only and no PPAP is planned or required. Reason for Changes: Customer Request. The change is necessary to clarify the information on mounting screw used on the AMPSEAL Header, to modify the mounting hole location dimensions from reference dimension to a tolerance dimension and the suggested mounting hole dimensions will be expanded to aid in the assembly of the header. The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field.
Description of Changes:The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to the AMPSEAL Sealed Connector System header with gold pins only for the part number(s) listed in this notice.This change is to increase the gold thickness in the contact area on the header pin where it mates to the socket terminal beam for increase durability and reduce the overall length of the gold plate outside the contact area. These PNs are TE proprietary designs, therefore considered catalog/general market product.Reason for Changes:The change is necessary to standardize plating process across other TE header pins & to avoid any supply chain disruptions due to exiting process differences. The change does not impact connector performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to shipping location for the part number(s) listed in the attached. There is no change in manufacturing location or product. These PNs are TE proprietary designs, therefore considered catalog/general market product. All products you currently receive from our Tullahoma, TN (USA) location will be transitioned to the new Distribution Center at Greensboro, NC (USA). Reason for Changes: The change is necessary to better serve our customers and as part of our continuous improvement efforts to provide extraordinary Customer Service
AMPSEAL Right Angle Headers Description of Changes Purpose is advanced notification of manufacturing changes related to AMPSEAL Right Angle Headers. AMPSEAL is a TE Connectivity General Market product line with sales to many customers worldwide. A new right-angle header pin semi-automated stitching and automated testing line work center is being implemented. The new assembly cell will be located at a qualified TE Connectivity Mexico manufacturing location, an IATF certified site. The new line will produce all sizes of the right-angle header. There are no changes to component material or TE suppliers
AMPSEAL Sealed Connector System - Header Assemblies Description of Changes This PCN is an addendum to previous AMPSEAL PCN numbers E-18-008460 (Future PCN 60454). In an effort to maximize our capacity, our intent is to move the molding of the header housing and the dispensing of the flange seal material on the header assemblies from the current TE molding and assembly manufacturing location to a new single TE manufacturing location in Empalme, Sonora, Mexico. This second TE facility is located in the same compound as the current TE facility.
Ampseal Header Products Description of Changes As part of our continuous improvement efforts to provide extraordinary Customer Service, we are pleased to announce the following: To improve the transit time of products to our mutual end customers, TE Connectivity is changing the distribution location for several products manufactured in Mexico currently stored at our Ontario, California or El Paso, Texas distribution centers. Instead we would like to store in our Hermosillo, Mexico DC ASAP. Customers have the option to pick up in Hermosillo, Mexico or to pick up in Nogales, AZ at our cross-dock. Upon receipt, distributor orders will be tendered to the carrier in line with each distributors Incoterms. The proximity of the Nogales cross dock to our Hermosillo, Mexico site will simplify the flow of products across the border. The longer-term intent will be to distribute from a point in the US due to MFG location change (Reference PCN E-18-008460 for MFG Change) during the latter half of 2019.
Description of Changes:This is an addendum to PCN-18-008460, a copy is attached on this PCN.If the customer requires a PPAP submission, please place the request with firstname.lastname@example.org If there are any further questions or concerns, please contact your TE Sales Contact or Account Manager directly.Reason for Changes: The PPAP submission email address was not included in PCN-18-008460. To aid in customer PPAP receipt, this information is being supplied
General Product Description: AMPSEAL Sealed Connector System, Header Assemblies Description of Changes Scope of changes in this notification include: New capacity molds, Additional automated assembly lines, Assembly line transfers Manufacturing location change: from Empalme, Sonora, Mexico to Tullahoma TN Plant. (Tullahoma plant is IATF certified) Packaging change: To meet AIAG standards, Automated packaging in plastic trays, Better protection during shipping, Quantity per box change. S Reason for Changes: This product line has seen extensive demand increases from our customer base. This demand is outpacing the current capacity and has impacted on-time deliveries. TE is investing to ensure that the current situation is corrected, as well as for the future, consistent with our goal of on-time delivery of defect free products First Date To Ship (Changed Parts Only): 01-AUG-2018Last Date for Mixed Shipments: (Changed Parts Only): 29-MAR-2019
Description of Changes A duplication of the flange seal material dispensing equipment at the TE manufacturing plant in Empalme, Mx Reason for Changes: This PCN is an advanced notification of manufacturing changes to the AMPSEAL Sealed Header Product Line. This product line has seen extensive demand increases that has impacted on-time deliveries. We are notifying you that a duplication of the flange seal material dispensing equipment is being released at the TE manufacturing plant in Empalme, Mx. This equipment will be used to address these significant demand increases in the AMPSEAL product line. Due to the urgency, TE is proceeding with the project and changes above. The effective date of assemblies from new dispensing equipment is targeted for 05/31/18.First Date To Ship (Changed Parts Only): 31-MAY-2018Last Date for Mixed Shipments: (Changed Parts Only): 04-MAR-2019
|No of Positions:||14|
|Style/Orientation:||Right Angle Header/Plug|
|Operating Temp Range:||-40°C to +125°C|
|No of Rows:||3|
|Mounting Method:||Through Hole|
36 per Tray