Manufacturer Part #
14 - 18 AWG Size 16 Nickel Plated Crimp Socket
|Mfr. Name:||TE Connectivity|
|Standard Pkg:|| |
Product Variant Information section
4000 per Reel
General Product Description: Size 16 Stamped and Formed Sockets Manufacturing Location Change Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity is adding a manufacturing location and transferring one tool capable of producing the Size 16 stamped and formed socket part numbers listed below from USA to China (Tool ID 6). Remaining tools will be unaffected. This change affects only customers in China. Shipping point will change to TE Suzhou for these affected customers. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via firstname.lastname@example.org or TE e-PPAP system. Submissions will not occur without request. If PPAP is requested, disposition response is required within 14 days of submit date or it will be considered approved. Reason for Changes: This change is necessary for alignment of overall manufacturing capacity and footprint to better meet our Customer's needs. IMPORTANT: The change will not impact fit or function. The only change to the FORM is a circle added around the Tool ID on the back of the part to signify the part originated in China. See picture attached.First Date To Ship (Changed Parts Only): 03-MAY-2020Last Date for Mixed Shipments: (Changed Parts Only): 03-MAY-2025
Description of Changes: Dear Customer, in an effort to continuously improve our products, TE-ICT will update the nickel crimp area for the Size 16 stamped and formed Pins and Sockets listed in this notice. The existing nickel crimp area will be changed to tin over nickel. This will not impact connector performance. IMPORTANT: This is a continual change so the current and previous revisions of this part can be used interchangeably in the field. This change is being phased in gradually and previous revisions may remain stocked until use. Reason for Changes: Product Improvement. Standardization of the plating in the crimp area across TE/DEUTSCH Size 16 Stamped and Formed contacts. Estimated Dates:
Description of Changes:The Industrial and Commercial Transportation business unit of TE Connectivity is adding new capacity tooling for the part numbers listed in this notice.Reason for Changes: Dear Customer, The new tooling is necessary to improve production capacity. The added tooling does not impact connector performance. IMPORTANT: Parts from all tools of these parts can be used interchangeably in the field. Shipments of parts from different tools may be mixed.
Description of Changes This is a revision letter change only, the existing parts did not change. The only change is to the product drawings. Reason for Changes: Manufacturing / Process Requirements. Dear Customer, fit, form or function of these part numbers are not affected. You will not see any change to the parts delivered to you except for the revision letter.
|Contact Termination:||Crimp Terminal|
|Wire Gauge:||AWG 14-18|
|Contact Material:||Copper Alloy|
|Mounting Method:||Wire Mount|
4000 per Reel