Manufacturer Part #
ATtiny817 AVR® ATtiny Touch, Capacitive Sensor Evaluation Board
ATtiny417/817 Data Sheet Microchip has released a new DeviceDoc for the ATtiny417/817 Data Sheet of devices. Description of Change: 1. Document section: Editorial updates2. Device section: a. Introduction: Added a note for automotive data sheetsChanged text to align with all tinyAVR� 0- and 1-series data sheetsb. Retention endurance numbers updatedc. Data Sheet Clarification Document chapter addedd. Ordering Information moved e. I/O Multiplexing and Considerations updated. 3. Configuration and User Fuses section: RSTPINCFG: Time-out after a system reset when fused to be GPIO explained.4. BOD - Brown-out Detector section: Removed levels not characterized by minimum and maximum values and Added a note for typical values and reference to electrical characteristics.5. TCA section: Added a note for alternative WOn pins6. USART section: Clarified One-Wire mode, clarified text about Disabling the Transmitter and Reverted 32�6 to 16�3 baud samples in RXMODE bits in CTRLB7. SPI section: Clarified functionality for SPI SS pin8. CRCSCAN section: Removed unsupported BACKGROUND and CONTINUOUS scan functionality9. ADC - Analog-to-Digital Converter section: Added missing calibration register10. UPDI section: Added a warning for ESD protection and GPIO functionality disabled for a period after a system reset, changed from ms to clock cycles11. Electrical Characteristics section: Added a note for Chip Erase in General Operating Ratings, Added Electrical Characteristics for PTC and Corrected the description for some symbols in the I/O Pin Characteristics table12. Errata section: Errata moved to ATtiny417/817 Silicon Errata and Data Sheet Clarification Document 13. Ordering Information section: Updated with product page links and ordering codes14. Product Identification System section: Updated with Tube and Tray packing media15. Package Drawings section: Updated package drawings to Microchip standardReason for Change: To Improve ManufacturabilityPlease be advised that this is a change to the document only the product has not been changed.