Manufacturer Part #
DT04-3P-EP04, REC, 3POS, GRY, N, CAP
|Mfr. Name:||TE Connectivity|
DEUTSCH DT Series Plug and Receptacle E-seal Grommet Color Change Description of Changes The Industrial and Commercial Transportation (ICT) business unit of TE Connectivity (TEC) is making a change to the product drawing for E-Seal grommet Grommet (E-Seal) color change from "Red-Orange" to "Burnt Red". 114-151009 Spec has been updated. Reason for Changes: The change is necessary to help our manual assembly lines to make a visual distinction between E-seal and N-seal grommets. This change affects form only (grommet color). The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed
Description of Changes:The ICT business unit of TE Connectivity is transferring production of part numbers listed in this notice from TE Hemet/CA-USA to TE Tullahoma/TN-USA, TE Empalme/Mexico, or TE externally approved supplier. Shipping point will change from Ontario, CA, USA to Greensboro, NC, USA or Hermosillo, Mexico. These PNs are TE proprietary designs, therefore considered catalog/general market product. Tools that manufacture parts within this PCN are identified as "swing tool" and TE reserves the right in future to move tool to a TE ICT Manufacturing location and/or a TE externally approved supplier as needed. In case of subsequent transfer of swing tool, PCN will be sent to notify with zero day wait period. PPAP and/or sample requests must be submitted within 14 days of PCN submission via email@example.com or TE e-PPAP system. Reason for Changes: This change is necessary for alignment of overall manufacturing capacity and footprint to better meet our Customer's needs. IMPORTANT: The change will not impact fit, form or function
General Product Description: DEUTSCH DT2pin and 3pin Plug and Receptacles (with welded caps) Identification and Date Code Marking Addition. Description of Changes Part number identification and date code marking (see pictures attached) to be added to the housings of parts manufactured in the TEC Suzhou (China) location. Reason for Changes: In order to identify parts manufactured in the TEC Suzhou China facility we are adding part number marking per the images above. This change affects only the appearance on DT2 and DT3 plug and receptacle connectors. Form, fit and function are not affected by this additional marking. Shipments of both versions may be mixed. IMPORTANT: This is a continual improvement, the current and previous revisions of these parts can be used interchangeably in the field. The additional identification is being phased in gradually and previous revisions can remain stocked until use. A note will be added to the product drawing to indicate that the marking is optional and to be used only when parts are manufactured in China. Reference PCN Aug2017 E-17-010843. First Date To Ship (Changed Parts Only): 01-APR-2019Last Date for Mixed Shipments: (Changed Parts Only): 01-JAN-2025
Description of Changes:The Industrial and Commercial Transportation (ICT) business unit of TE Connectivity (TEC) will be updating the new tabulate product drawings to include weld cap versions. Reason for Changes: Document Clarification. Dear Customer, in an effort to continuously improve our product documentation, TE-ICT has updated the new tabulate product drawings to include the weld cap versions prior to start of production. IMPORTANT: This is documentation clarification and does not affect part fit, form or function. All products in stock and field are not affected and can be used interchangeably in the field. See attached PCN E-17-010843 for reference.