
Manufacturer Part #
CY7C68013A-56BAXC
CY7C68 Series 16 kb RAM EZ-USB FX2LP™ USB Microcontroller - VFBGA-56
| |||||||||||
Mfr. Name: | Cypress | ||||||||||
Standard Pkg: | Product Variant Information section Available PackagingPackage Qty:490 per Tray Package Style:VFBGA-56 Mounting Method:Surface Mount | ||||||||||
Date Code: | 2031 |
Product Specification
Shipping Information:
ECCN:
PCN Information:
Subject: USB Products Failure Analysis Policy Change Description of Change: Cypress is changing its policy for failure analysis of USB products to only accept units for failure analysis if the customer has successfully completed an ABA swap test1 for non-WLCSP/BGA packages or chip isolation test for WLCSP/BGA packages to confirm the failure was caused by the Cypress device. Additional information to replicate and solve the customer issue in a timely manner will be required. Benefit of Change: By implementing this policy change, Cypress will better be able to respond to the confirmed issues customers are observing. This policy change is required due to the large percentage of NTF (No Trouble Found) results on USB failure analysis cases. Approximate Implementation Date: This change will be implemented effective with the date of this notification.
Addendum to PIN195102 - Manufacturing Label and Packing Configuration Standardization Description of Change: The purpose of this addendum is to correct the date from January 20, 2019 to January 20, 2020, in the "3rd paragraph in the 'Description of Change' section. This notification is to inform customers that Cypress will be standardizing its manufacturing labels and tray/tube packing configuration. It may be recalled that the Cypress entity consolidation (following the merger with Spansion Corp) was announced via Product Information Notification PIN174801 in November 2017. As the next phase of the entity consolidation process, Cypress will be adapting a new manufacturing label format for all products and revising shipping configurations for select product shipped in trays and tubes.
Product Lifecycle:
Technical Attributes
Data Rate: | 12Mbps |
No of Channels: | 1 |
Supply Voltage: | 3V to 3.6V |
Operating Temp Range: | 0°C to 70°C |
Package Style: | VFBGA-56 |
Mounting Method: | Surface Mount |
Features & Applications
The CY7C68013A-100AXC is a low power version of the EZ-USB FX2™ (CY7C68013), which is a highly integrated, low power USB 2.0 microcontroller.
By integrating the USB 2.0 transceiver, serial interface engine (SIE),enhanced 8051 microcontroller, and a programmable peripheral interface in a single chip,Cypress has created a cost effective solution that provides superior time-to-market advantages with low power to enable bus powered applications
The ingenious architecture of FX2LP results in data transfer rates of over 53 Mbytes per second, the maximum allowable USB 2.0 bandwidth, while still using a low cost 8051 microcontroller in a package as small as a 56 VFBGA (5 mm x 5 mm). Because it incorporates the USB 2.0 transceiver, the FX2LP is more economical, providing a smaller footprint solution
Features:
- Single chip integrated USB 2.0 transceiver, smart SIE, and enhanced 8051 microprocessor
- Fit, form, and function compatible with the FX2
- Ultra low power: ICC No more than 85 mA in any mode
- Software: 8051 code runs from:
- Four programmable BULK, INTERRUPT, and
- Additional programmable (BULK/INTERRUPT) 64-byteendpoint
- 8-bit or 16-bit external data interface
- Smart media standard ECC generation
- GPIF (general programmable interface)
- Integrated, industry standard enhanced 8051
- Vectored USB interrupts and GPIF/FIFO interrupts
- Separate data buffers for the setup and data portions of aCONTROL transfer
- Integrated I2C controller, runs at 100 or 400 kHz
- Four integrated FIFOs
Applications:
- Portable video recorder
- MPEG/TV conversion
- DSL modems
- ATA interface
- Memory card readers
- Legacy conversion devices
- Cameras
- Scanners
- Wireless LAN
- MP3 players
- Networking
Available Packaging
Package Qty:
490 per Tray
Package Style:
VFBGA-56
Mounting Method:
Surface Mount