onsemi | FXL2T245L10X

The FXL2T245L10X is a 3.6 V configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6 V to as low as 1.1 V

The A Port tracks the VCCA level, and the B Port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V 

Features:

• Bi-directional interface between any 2 levels from 1.1 V to 3.6 V
• Fully configurable, inputs track VCC level
• Non-preferential power-up sequencing; either VCC may be powered-up first
• No power-up sequencing required
• Outputs remain in 3-STATE until active VCC level is reached
• Outputs switch to 3-STATE if either VCC is at GND
• Power-off protection
• Control inputs (T/R#, OE#) levels are referenced to VCCA voltage
• Packaged in 10-lead Pb-Free MicroPak (1.6mm x 2.1mm) package
• ESD protection exceeds:
• 4 kV HBM ESD
• 8 kV HBM I/O to GND ESD
• 1 kV CDM ESD
• 200 V MM ESD

Applications:

• Automation 
• Broadband Access
• Consumer Appliances
• Automation
• Broadband Access
• Desktop PC

View the available Series of 2-Bit Signal Translators