Orders shipping outside of United States will be on hold while the company evaluates tariff impacts.Please contact your salesperson for assistance.
Free shipping within the continental US over $50. Conditions apply
Manufacturer Part #
282088-1
Superseal 1.5 Series Polyamide 6.6 Glass 4 Position Plug Housing Connector
| | |||||||||||
| | |||||||||||
| Mfr. Name: | TE Connectivity | ||||||||||
| Standard Pkg: | Product Variant Information section Available PackagingPackage Qty:1 per Bag Mounting Method:Wire Mount | ||||||||||
| Date Code: | 2351 | ||||||||||
TE Connectivity 282088-1 - Product Specification
Shipping Information:
ECCN:
PCN Information:
General Product Description:AMP SUPERSEAL 1.5 SERIES 4P PLDescription of ChangesThis Product Change Notification (PCN) replace the P-24-027215 and applies exclusively to customers who purchase the component through TE Connectivity Brazil. Dear customer, we hereby inform you about the mold replacement project for the production of housing connectors used to assembly the PN's 282088-1 and 282088-3 connector. We would like to inform you that the component Housing PN 282059-1 and 282059-3, used in the assembly PN 282088-1 and 282088-3, will be transitioned to an outsourced manufacturing process. Please note that the assembly PN 282088-1/-3 will continue to be carried out by TE Connectivity. The only change is that TE Connectivity will now incorporate the Housing 282059-1/-3, supplied by a certified external manufacturer, into the assembly process, but TE Connectivity will continue to supply this product to their customersReason for Changes:Dear customer , as result of our continuous strive for improving our process, we hereby inform you about this outsourcing project. This outsourcing is executing by following a strict procedure which garantees no negative insurance on quality, ability to supply and form-fit-function of this product. Please after receiving this notification, PPAP and sample must be requested by ePPAP System in 10 days.In case ofyou do not request in ePPAP, TE Connectivity will understand and considered that this change was accepted.First Date To Ship (Changed Parts Only):19-JAN-2026
Description of Changes:Dear customer, we hereby inform you about the mold replacement project for the production of housing connectors used to assembly the PN's 282088-1 and 282088-3 connector.Reason for Changes:Document clarification.Dear customer, as result of our continuous strive for improving our processes we hereby inform you about the mold replacement project for the production of housing connectors used to assembly the PN 282088-1 and 282088-3 connector in Brazilian plant.
Description of Changes: This product change notification (PCN) is to inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. As of February 20, 2024 we will increase the delivery unit & the minimum order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders in case adjustments have not taken place in time.Reason for Changes: New specification. To assure standardized and uniform packaging for each basic product part number, to improve sustainability and minimize quality risks.
Description of ChangesThis Product Change Notification (PCN) is to inform you about a resin supplier base extension for the 4pos, 5pos, and 6pos Plug housing of the mentioned part numbers, which are under the design responsibility of TE Connectivity. This PCN is informational only and no further actions are necessary from your side, as this extension does not have any impact to form, fit or function change. The material itself will remain PA66-GF as stated on the general TE customer drawing. The PN in scope of this PCN is a general sales / catalogue part. Therefore, no contractual agreement related to sub-supplier selection is applicable. VDA 2 Trigger matrix use case 30 and PPAP towards Customer/s are not applicable too. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. Internal release process is ensured by TE, including product validation.Reason for Changes:Part status change. The supplier base extension is needed to protect our customers and TE Connectivity from material shortages risks and ensure deliveries. Alternative resin/material introduced is a recompound resin (PA66-GF), whose industrial grade quality is under TE control. The TE Connectivity choice is also consistent with the efforts for reducing the C02 content of our products and build a sustainable future. These products with recompound resin have been tested according to the relevant specifications and meet the product specific requirements.
General Product Description:Multiple part numbersDescription of ChangesAdding TE Kunshan for alternate manufacturing source. PN is currently in series production at that location.Reason for Changes:Product improvement.Additional part source to improve delivery constraints.First Date To Ship (Changed Parts Only: 14-APR-2023
Part Status:
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=en&field2=282088-1&field4=TE Connectivity&field18=https://p1na.futureelectronics.com/p/interconnect--connector-tools-contacts-accessories/282088-1-te-connectivity-3145687
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=en&field2=282088-1&field4=TE Connectivity&field18=https://p1na.futureelectronics.com/p/interconnect--connector-tools-contacts-accessories/282088-1-te-connectivity-3145687
TE Connectivity 282088-1 - Technical Attributes
| Type: | Contact |
| Contact Termination: | Crimp Terminal |
| No of Positions: | 4 |
| Color: | Black |
| Voltage Rating: | 24V |
| Mounting Method: | Wire Mount |
Features & Applications
The 282088-1 is a part of Superseal 1.5 Series Polyamide 6.6 Glass 4 Position Plug Housing Connector
Product Type Features:
- Product Type = Connector
- Product Line = Super Seal
- Number of Positions = 4
- Secondary Lock Material = Polyamide 6.6 Glass Filled
- Secondary Lock Color = Red
- Seal Material = Silicone Rubber
- Seal Color = Yellow
- Preloaded = No
- Accepts Contact Gender = Receptacle
- Connector Style = Plug
- Housing Color = Black
- Housing Material = Polyamide 6.6 GF
Available Packaging
Package Qty:
1 per Bag
Mounting Method:
Wire Mount