
Manufacturer Part #
DT06-2S-C015
DT Series Contact Size 16 2 Way Gray Plug
TE Connectivity DT06-2S-C015 - Product Specification
Shipping Information:
ECCN:
PCN Information:
General Product Description: DT 2 to 12 ways series connector Description of Changes The ICT business unit of TE is adding a fourth source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The change is needed as a result of global demand in excess of PA66 and the available capacity of our suppliers. The additional source material does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed. Product Category:ConnectorsChange Feature: Dual SourceKind of Change: MaterialPotential Customer Impact: No Customer ImpactFirst Ship Date of Changed Items (Changed Parts Only): 29-JUL-2022Last Date for Mixed Shipments: (Changed Parts Only): 30-JUN-2024
General Product Description: DT 2 to 12 pin series connectors. The ICT business unit of TEC is releasing a 3rd source material for the part numbers Description of Changes DT 2 to 12 pin series connectors. The ICT business unit of TEC is releasing a 3rd source material for the part numbers listed, effectively immediately. We previously shared PCN -21-112194 that indicated we were adding a third source of PA66 materiial.Product Category: Connector HousingsFirst Ship Date of Changed Items (Changed Parts Only): 18-NOV-2021
Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity is adding new capacity tooling for the plug shell component for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The new tooling is necessary to increase capacity and improve delivery to you, the Customer. The added tooling does not impact connector performance. IMPORTANT: No fit, form or function change. Parts off the new tool are identical to current production. Shipments from current and new tooling configurations may be mixed.
General Product Description: DT 2 to 12 ways series connector Description of Changes The ICT business unit of TE is adding a third source material for the part numbers listed. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The change is needed as a result of global demand in excess of PA66 and the available capacity of our suppliers. The 3rd source material does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed. First Date To Ship (Changed Parts Only): 22-DEC-2021Last Date for Mixed Shipments: (Changed Parts Only): 22-JUN-2023
General Product Description: DT 2/3 ways series connector Description of Changes The ICT business unit of TE is adding a 2nd source material for the part numbers listed below. Currently the DT connectors are using single source PA66 material. The 2nd source material does not impact performance. The 2nd source material is V0 and UL re-certification on the connectors is in process. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Shipments of both configurations may be mixed. Reason for Changes: Dear Customer, we hereby inform you of this change. With global demand in excess of supply on PA66 the material supplier is restricting TE buying allotment. The allotted amount is at a level where production is impacted and to close the gap an alternative PA66 supply is needed. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change is being phased in gradually and previous revision can remain stocked until use. First Date To Ship (Changed Parts Only): 15-JUN-2021Last Date for Mixed Shipments: (Changed Parts Only): 15-DEC-2022
TE Industrial & Commercial Transportation Solutions Force Majeure Notice - Resin Supply TE Connectivity and its affiliates (collectively TE) have received Force Majeure notices from several resin suppliers (including Almaak, Ascend, BASF, DOMO, DuPont, Lanxess, LyondellBasell, Sabic and Solvay) with the potential for more to be added to the list. Please be assured that TE is exploring options to minimize the impact to your supply chain. Specifically, TE is (1) continuously working to learn our suppliers' resulting allocation decisions and determine how those allocation decisions are going to impact our production; and (2) where possible, actively testing alternative material procured from an alternative supply source. Please be prepared that we may approach you for urgent decision making in this regard. However, due to the unprecedented supply challenges and raw material shortages, TE must respectfully advise that these circumstances (i) render TE's performance impossible, and (ii) constitute a Force Majeure event under all applicable agreements between TE and its customers and their respective affiliates. As such, TE will not accept responsibility (including the responsibility for financial costs) for any resulting line-down or other supply chain related charges.
General Product Description: DEUTSCH DT 2 way Plug Connectors Manufacturing Location Change Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity is transferring the production of the part numbers listed below from TE Tullahoma/TN-USA to TE Empalme/ Mexico or a TE externally approved supplier. Shipping point will change from Greensboro,NC,USA to Hermosillo, MX. These PNs are TE proprietary designs, therefore considered catalog/general market product. Tools that manufacture parts within this PCN are identified as "swing tool" and TE reserves the right in future to move tool to a TE ICT Manufacturing location and/or a TE externally approved supplier as needed. This is a subsequent transfer of a swing tool, therefor, this is a notification PCN with a zero day wait period. Reference original manufacturing location change PCN E-19-011871. Level 4 PPAP will be available upon request via ict-ppap-request@te.com or ePPAP system. Reason for Changes: This change is necessary for alignment of overall manufacturing capacity and footprint to better meet our Customer's needs. IMPORTANT: The change will not impact fit, form or function First Date To Ship (Changed Parts Only): 18-JUN-2020Last Date for Mixed Shipments: (Changed Parts Only): 19-JUN-2025
DEUTSCH DT Series Plug and Receptacle E-seal Grommet Color Change Description of Changes The Industrial and Commercial Transportation (ICT) business unit of TE Connectivity (TEC) is making a change to the product drawing for E-Seal grommet Grommet (E-Seal) color change from "Red-Orange" to "Burnt Red". 114-151009 Spec has been updated. Reason for Changes: The change is necessary to help our manual assembly lines to make a visual distinction between E-seal and N-seal grommets. This change affects form only (grommet color). The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed
Part Status:
TE Connectivity DT06-2S-C015 - Technical Attributes
Mounting Method: | Wire Mount |
Available Packaging
Package Qty:
1 per Bag
Mounting Method:
Wire Mount