14 Position 4 mm Pitch Triple Row Shrouded Male Pin Header Connector
Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to shipping location for the part number(s) listed in the attached. There is no change in manufacturing location or product. These PNs are TE proprietary designs, therefore considered catalog/general market product. All products you currently receive from our Tullahoma, TN (USA) location will be transitioned to the new Distribution Center at Greensboro, NC (USA). Reason for Changes: The change is necessary to better serve our customers and as part of our continuous improvement efforts to provide extraordinary Customer Service
AMPSEAL Sealed Connector System - Header Assemblies Description of Changes This PCN is an addendum to previous AMPSEAL PCN numbers E-18-008460 (Future PCN 60454). In an effort to maximize our capacity, our intent is to move the molding of the header housing and the dispensing of the flange seal material on the header assemblies from the current TE molding and assembly manufacturing location to a new single TE manufacturing location in Empalme, Sonora, Mexico. This second TE facility is located in the same compound as the current TE facility.
Ampseal Header Products Description of Changes As part of our continuous improvement efforts to provide extraordinary Customer Service, we are pleased to announce the following: To improve the transit time of products to our mutual end customers, TE Connectivity is changing the distribution location for several products manufactured in Mexico currently stored at our Ontario, California or El Paso, Texas distribution centers. Instead we would like to store in our Hermosillo, Mexico DC ASAP. Customers have the option to pick up in Hermosillo, Mexico or to pick up in Nogales, AZ at our cross-dock. Upon receipt, distributor orders will be tendered to the carrier in line with each distributors Incoterms. The proximity of the Nogales cross dock to our Hermosillo, Mexico site will simplify the flow of products across the border. The longer-term intent will be to distribute from a point in the US due to MFG location change (Reference PCN E-18-008460 for MFG Change) during the latter half of 2019.
Description of Changes:This is an addendum to PCN-18-008460, a copy is attached on this PCN.If the customer requires a PPAP submission, please place the request with firstname.lastname@example.org If there are any further questions or concerns, please contact your TE Sales Contact or Account Manager directly.Reason for Changes: The PPAP submission email address was not included in PCN-18-008460. To aid in customer PPAP receipt, this information is being supplied
General Product Description: AMPSEAL Sealed Connector System, Header Assemblies Description of Changes Scope of changes in this notification include: New capacity molds, Additional automated assembly lines, Assembly line transfers Manufacturing location change: from Empalme, Sonora, Mexico to Tullahoma TN Plant. (Tullahoma plant is IATF certified) Packaging change: To meet AIAG standards, Automated packaging in plastic trays, Better protection during shipping, Quantity per box change. S Reason for Changes: This product line has seen extensive demand increases from our customer base. This demand is outpacing the current capacity and has impacted on-time deliveries. TE is investing to ensure that the current situation is corrected, as well as for the future, consistent with our goal of on-time delivery of defect free products First Date To Ship (Changed Parts Only): 01-AUG-2018Last Date for Mixed Shipments: (Changed Parts Only): 29-MAR-2019
Description of Changes A duplication of the flange seal material dispensing equipment at the TE manufacturing plant in Empalme, Mx Reason for Changes: This PCN is an advanced notification of manufacturing changes to the AMPSEAL Sealed Header Product Line. This product line has seen extensive demand increases that has impacted on-time deliveries. We are notifying you that a duplication of the flange seal material dispensing equipment is being released at the TE manufacturing plant in Empalme, Mx. This equipment will be used to address these significant demand increases in the AMPSEAL product line. Due to the urgency, TE is proceeding with the project and changes above. The effective date of assemblies from new dispensing equipment is targeted for 05/31/18.First Date To Ship (Changed Parts Only): 31-MAY-2018Last Date for Mixed Shipments: (Changed Parts Only): 04-MAR-2019
Description of Changes TE Empalme Consolidation Project Molding Process.Dear customer, we are proud to announce that TE Connectivity, Automotive Business Unit is in the process of a Consolidation Project in the Empalme location the objective is to consolidate Plant 1 (Molding & Mechatronics) and Plant 4 (Assembly) into a single building, in the same industrial park. This notification includes only the first stage of the molding process move. Reason for Changes: Product improvement.To provide our customers the highest quality products, this will drive to a Vertical Integration, Safety Systems improvements, Warehouse optimization, and excellent customer experience.
Description of Changes:In an effort to continuously provide quality product improvements, TE manufacturing will be changing the current flange seal material on the AMPSEAL headers in Feb 2017 instead of Jan 2017 as previously reported. The new seal material color will be opaque with the current material being black. The new material has been tested by Product Engineering and meets all testing described in Product Spec 108-1329Reason for Changes: Product improvement
Customer drawing PCB layout shows the header pin thru hole at DIA1.38+/-0.10 This hole size is too small for the header pin size and is changing to DIA1.75+/-0.10 Reason For Change: Document Clarification. The current PCB thru hole size is too small for the header pin diameter and is changing to add greater hole clearance. There is no change to the header pin size or the product in general, this is only an information change on the customer drawing
On Order:Order inventroy details 760
Factory Stock:Factory Stock: 1,390
Inventory held at our manufacturer's warehouse. Subject to availability and transit time.
Factory Lead Time: 5-10 Days
|No of Positions||14|
|Operating Temp Range||-40°C to +105°C|
|No of Rows||3|
|Mating Type||Hinge Lock|