Macronix | MX25L25635EMI-12G

The MX25L25635EMI-12G is a Part of MX25 Series Macronix Serial Multi I/O (MXSMIO™) Flash provides not only Single I/O, but also two kinds of different Multi-I/O interfaces. One is MX25xxx35 series offering Multi-in/Multi-out interface

Features:

• Serial Peripheral Interface compatible Mode 0 and Mode 3
• 268,435,456 x 1 bit structure or 34,217,728 x 2 bits (two I/O mode) structure or 67,108,864 x 4 bits (four I/O mode) structure
• 8192 Equal Sectors with 4K bytes each
  •  Any Sector can be erased individually
• 1024 Equal Blocks with 32K bytes each
  •  Any Block can be erased individually
• 512 Equal Blocks with 64K bytes each
  •  Any Block can be erased individually
• Power Supply Operation
  •  2.7 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1 V to Vcc +1 V

Applications:

• High Performance
• VCC = 2.7~3.6 V
  •  Normal read
  •  50 MHz
  •  Fast read
  •  1 I/O 80MHz with 8 dummy cycles
  •  2 I/O 70MHz with 4 dummy cycles
  •  4 I/O 70MHz with 6 dummy cycles
  •  Fast program time 1.4ms(typ) and 5ms(max)/page (256-byte per page)
  •  Byte program time 9us (typical)
  •  Continuously Program mode (automatically increase address under word program mode)
  •  Fast erase time 60ms (typ)/sector (4K-byte per sector) ; 0.5s(typ) /block (32K-byte per block); 0.7typ.) /block (64K-byte per block); 160s(typ) /chip
• Low Power Consumption
  •  Low active read current 45mA(max) at 80MHz, 40mA(max.) at 70MHz and 30mA(max) at 50MHz
  •  Low active programming current 25mA (max)
  •  Low active erase current 25mA (max)
  •  Standby current 200uA (max)
  •  Deep power down current 80uA (max)
• Typical 100,000 erase/program cycles