text.skipToContent text.skipToNavigation
Product Variant Information section
Product Specification Section
Pricing Section

Stock : 32 584

Sur commande : 0
Stock d'usine :Stock d'usine : 8 160
Délai d'usine : 12 Semaines
Commande minimale : 1
Multiples de : 1
Quantité Prix Internet
1+ $4.58
Total :

4,58 $

USD
Attributs
Attributes Table
Family Name PIC24F
Core Processor PIC
Program Memory Type Flash
Flash Size (Bytes) 256kB
RAM Size 16kB
Speed 32MHz
No of I/O Lines 53
InterfaceType / Connectivity I2C/SPI/UART
Peripherals Analog Comparators/I2C/On-Chip-ADC/PWM/SPI/UART/Watchdog
Number Of Timers 5
Supply Voltage 2V to 3.6V
Operating Temperature -40°C to +85°C
On-Chip ADC 16-chx10-bit
Watchdog Timers 1
Fonctionnalités et applications

The PIC24FJ256GA106-I/PT is a 256 kB flash, 16 kB RAM, high performance 16-bit motor control family of microcontroller. It is ideal for low power and connectivity applications that benefit from the availability of multiple serial ports, 4xUARTS, and 23 independent timers.

Features:

  • CPU:
    • Up to 16 MIPS performance
    • 16 x 16 Hardware Multiply, Single Cycle Execution
    • 12-bit x 16-bit Hardware Divider
    • C Compiler Optimized Instruction Set
  • nanoWatt Power Managed Modes:
    • Run, Idle and Sleep modes
    • Multiple, Switchable Clock Modes for Optimum Performance and Power Management
    • Run mode: 1 mA/MIPS, 2.0V Typical
    • Sleep mode Current Down to 100 nA Typical
    • Standby Current with 32 kHz Oscillator:2.5 uA,2.0V typical
  • Flash Program Memory:
    • Self-Reprogrammable under Software Control
    • 10,000 erase/write cycles
    • 20 year data retention
    • EEprom emulation capable
  • System:
    • Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
    • On-chip LDO Voltage Regulator
    • JTAG Boundary Scan and Flash Memory Program Support
    • Fail-Safe Clock Monitor – allows safe shutdown if clock fails
    • Watchdog Timer with separate RC oscillator
  • Analog Features:
    • 10-bit ADC, 16 channels, 500k samples per second
    • Three Analog comparators
  • Peripherals:
    • CTMU supports Capacitive Touch applications
    • Perpheral Pin Select allows I/O remapping of many peripherals in real time
    • 4xUART Modules with LIN and IrDA support, 4 Deep FIFO
    • 3xSPI ™ Modules with 8 Deep FIFO
    • 3xI2C™ Modules with Master and Slave Modes
    • Five 16-bit Timer Modules
    • Up to 9 Input Capture and 5 Output Compare/PWM with dedicated time base
    • Hardware RTCC, Real-Time Clock Calendar with Alarms
    • PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data