text.skipToContent text.skipToNavigation
Product Variant Information section
Product Specification Section
Pricing Section

Stock : 30 000

Sur commande :Order inventroy details 74 000
Stock d'usine :Stock d'usine : 0
Délai d'usine : 10 Semaines
Commande minimale : 1 000
Multiples de : 1 000
Quantité Prix Internet
1 000+ $5.88
Total :

5 880,00 $

USD
Attributs
Attributes Table
Family Name STM32F
Core Processor ARM Cortex M3
Program Memory Type Flash
Flash Size (Bytes) 768kB
RAM Size 80kB
Speed 36MHz
No of I/O Lines 80
InterfaceType / Connectivity I2C/SPI/USART
Peripherals I2C/On-Chip-ADC/On-Chip-DAC/SPI/USART/Watchdog
Number Of Timers 12
Supply Voltage 2V to 3.6V
Operating Temperature -40°C to +85°C
On-Chip ADC 2(16-chx12-bit)
On-Chip DAC 2(2-chx12-bit)
Watchdog Timers 2
Fonctionnalités et applications

The STM32F101VFT6TR is a part of STM32F1 Series XL-density access line, ARM-based 32-bit MCU with 768 KB to 1 MB Flash, 15 timers, 1 ADC and 10 communication interfaces. It has an Operating temperature ranges b/w -40 °C to 85 °C and available in a 100-LQFP Package.

The STM32F101xF access line family incorporates the highperformance ARM® Cortex™-M3 32-bit RISC core operating at a 36 MHz frequency, highspeed embedded memories (Flash memory up to 1 Mbyte and SRAM of 80 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, ten general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.

Features:

  • Core: ARM 32-bit Cortex™-M3 CPU with MPU
    • 36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance
    • Single-cycle multiplication and hardware division
  • Memories
    • 768 Kbytes to 1 Mbyte of Flash memory (dual bank with read-while-write capability)
    • 80 Kbytes of SRAM
    • Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
    • LCD parallel interface, 8080/6800 modes
  • Clock, reset and supply management
    • 2.0 to 3.6 V application supply and I/Os
    • POR, PDR, and programmable voltage detector (PVD)
    • 4-to-16 MHz crystal oscillator
    • Internal 8 MHz factory-trimmed RC
    • Internal 40 kHz RC with calibration capability
    • 32 kHz oscillator for RTC with calibration
  • Low power
    • Sleep, Stop and Standby modes
    • VBAT supply for RTC and backup registers
  • 1 x 12-bit, 1 μs A/D converters (up to 16 channels)
    • Conversion range: 0 to 3.6 V
    • Temperature sensor
  • 2 × 12-bit D/A converters
  • DMA
    • 12-channel DMA controller
    • Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs
  • Up to 112 fast I/O ports
    • 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
  • Debug mode
    • Serial wire debug (SWD) & JTAG interfaces
    • Cortex-M3 Embedded Trace Macrocell™
  • Up to 15 timers
    • Up to ten 16-bit timers, with up to 4 IC/OC/PWM or pulse counters
    • 2 × watchdog timers (Independent and Window)
    • SysTick timer: a 24-bit downcounter
    • 2 × 16-bit basic timers to drive the DAC
  • Up to 10 communication interfaces
    • Up to 2 x I2C interfaces (SMBus/PMBus)
    • Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
    • Up to 3 SPIs (18 Mbit/s)
  • CRC calculation unit, 96-bit unique ID
  • ECOPACK®packages

Applications:

  • PLCs
  • Printers
  • Scanners
  • Alarm systemsVideo intercoms
  • Power meters