NXP | MK60DN512VLQ10

The MK60DN512VLQ10 is a 3.6 V input voltage, 512-kB flash and 128 kB RAM, 32 Bit microcontroller. It is available in surface mount LQFP-144 package.

Features:

• Ultra-Low-Power:
  • 10 low-power modes with power and clock gating for optimal peripheral activity and recovery times. Stop currents down to 2 µA, and run currents of <350 µA/MHz, with 4 µs wake-up from Stop mode
  • Full memory and analog operation down to 1.71 volts for extended battery life 
• Flash, SRAM and FlexMemory:
  • 256 KB - 512 KB flash. Fast access, high reliability with four-level security protection
  • 64 KB-128 KB of SRAM 
• Mixed-Signal capability:
  • Up two 12-bit digital-to-analog-converter (DAC) for analog waveform generation for audio applications
  • Three high-speed comparators providing fast and accurate motor over-current protection by driving PWMs to a safe state
• Performance:
  • ARM® Cortex-M4™ core with DSP, 100MHz clock, single cycle MAC, and single instruction multiple data (SIMD) extensions 16-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput
  • Cross bar switch enables concurrent multi-master bus accesses, increasing bus bandwidth
• Timing and Control:
  • Up to three FlexTimers with a total of 12 channels. Hardware dead-time insertion and quadrature decoding for motor control
  • Carrier modulator timer for infrared waveform generation in remote control applications

Applications:

• Industrial:
  • Programmable Logic Control (PLC) 
  • Portable Electronic Point of Sale (ePOS) Terminals 
  • Security Cameras
  • Building Automation Controllers
  • Control Panels (Elevator)
• Medical/Healthcare:
  • Heart Rate Monitors 
  • Telehealth System 
  • Anesthesia Unit Monitor 
  • Multi-Parameter Patient Monitor 
  • Ventilators and Respirators 
  • Defibrillators 
  • Portable Electrocardiograph (ECG)