AMPSEAL 23 Position Snap Mount Three Row Right Angle 4 mm Pin Header
Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity will be moving a molding module that produces the 23 position right angle header housing from Tullahoma TN facility to the Empalme Mx facility. the new header housing will be designated as cavity D5. This change will take place immediately so that customer delivery will not be affected. Reason for Changes: This change is necessary to replace the current molding module which has surpassed its end of life usage. The change will not impact connector performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field and previous revisions can remain stocked until used. Drawings are not affected by this change
Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to shipping location for the part number(s) listed in the attached. There is no change in manufacturing location or product. These PNs are TE proprietary designs, therefore considered catalog/general market product. All products you currently receive from our Tullahoma, TN (USA) location will be transitioned to the new Distribution Center at Greensboro, NC (USA). Reason for Changes: The change is necessary to better serve our customers and as part of our continuous improvement efforts to provide extraordinary Customer Service
AMPSEAL Right Angle Headers Description of Changes Purpose is advanced notification of manufacturing changes related to AMPSEAL Right Angle Headers. AMPSEAL is a TE Connectivity General Market product line with sales to many customers worldwide. A new right-angle header pin semi-automated stitching and automated testing line work center is being implemented. The new assembly cell will be located at a qualified TE Connectivity Mexico manufacturing location, an IATF certified site. The new line will produce all sizes of the right-angle header. There are no changes to component material or TE suppliers
AMPSEAL Sealed Connector System - Header Assemblies Description of Changes This PCN is an addendum to previous AMPSEAL PCN numbers E-18-008460 (Future PCN 60454). In an effort to maximize our capacity, our intent is to move the molding of the header housing and the dispensing of the flange seal material on the header assemblies from the current TE molding and assembly manufacturing location to a new single TE manufacturing location in Empalme, Sonora, Mexico. This second TE facility is located in the same compound as the current TE facility.
Ampseal Header Products Description of Changes As part of our continuous improvement efforts to provide extraordinary Customer Service, we are pleased to announce the following: To improve the transit time of products to our mutual end customers, TE Connectivity is changing the distribution location for several products manufactured in Mexico currently stored at our Ontario, California or El Paso, Texas distribution centers. Instead we would like to store in our Hermosillo, Mexico DC ASAP. Customers have the option to pick up in Hermosillo, Mexico or to pick up in Nogales, AZ at our cross-dock. Upon receipt, distributor orders will be tendered to the carrier in line with each distributors Incoterms. The proximity of the Nogales cross dock to our Hermosillo, Mexico site will simplify the flow of products across the border. The longer-term intent will be to distribute from a point in the US due to MFG location change (Reference PCN E-18-008460 for MFG Change) during the latter half of 2019.
TE Connectivity Products - Distribution Center change from WCDC, Ontario, CA (USA) to HLDC, Hermosillo, Senora (MX) Description of Changes THERE IS NO CHANGE TO MANUFACTURING LOCATION OR TO PARTS! Due to consolidation of Distribution Centers (DC), TE-ICT is moving the material from our Ontario, CA (USA) DC to our Hermosillo, Sonora, (Mexico) DC. The transition to Hermosillo, MX will take place during the weekend of October 27, 2018. All products you currently receive from our Ontario, CA (USA) location will be transitioned to the new Distribution Center by Monday, October 29, 2018. Below is current and new DC address and DUNS Code information. Current DC address: 1643 S. Parco Ave. Ontario CA 91761 Current DUNS Code: 040750247 New DC address: Corcom S.A. de C.V. c/o Tyco Electronics Corporation Blvd. Industrial Norte No. 23 Hermosillo, Sonora, Mexico 83118 New DUNS Code: 812819636
General Product Description: AMPSEAL Sealed Connector System, Header Assemblies Description of Changes Scope of changes in this notification include: New capacity molds, Additional automated assembly lines, Assembly line transfers Manufacturing location change: from Empalme, Sonora, Mexico to Tullahoma TN Plant. (Tullahoma plant is IATF certified) Packaging change: To meet AIAG standards, Automated packaging in plastic trays, Better protection during shipping, Quantity per box change. S Reason for Changes: This product line has seen extensive demand increases from our customer base. This demand is outpacing the current capacity and has impacted on-time deliveries. TE is investing to ensure that the current situation is corrected, as well as for the future, consistent with our goal of on-time delivery of defect free products First Date To Ship (Changed Parts Only): 01-AUG-2018Last Date for Mixed Shipments: (Changed Parts Only): 29-MAR-2019
Description of Changes A duplication of the flange seal material dispensing equipment at the TE manufacturing plant in Empalme, Mx Reason for Changes: This PCN is an advanced notification of manufacturing changes to the AMPSEAL Sealed Header Product Line. This product line has seen extensive demand increases that has impacted on-time deliveries. We are notifying you that a duplication of the flange seal material dispensing equipment is being released at the TE manufacturing plant in Empalme, Mx. This equipment will be used to address these significant demand increases in the AMPSEAL product line. Due to the urgency, TE is proceeding with the project and changes above. The effective date of assemblies from new dispensing equipment is targeted for 05/31/18.First Date To Ship (Changed Parts Only): 31-MAY-2018Last Date for Mixed Shipments: (Changed Parts Only): 04-MAR-2019
Description of Changes:In an effort to continuously provide quality product improvements, TE manufacturing will be changing the current flange seal material on the AMPSEAL headers in Feb 2017 instead of Jan 2017 as previously reported. The new seal material color will be opaque with the current material being black. The new material has been tested by Product Engineering and meets all testing described in Product Spec 108-1329Reason for Changes: Product improvement
On Order: 0
Factory Stock:Factory Stock: 14,400
Inventory held at our manufacturer's warehouse. Subject to availability and transit time.
Factory Lead Time: 5-10 Days
|No of Positions||23|
|Style/Orientation||Right Angle Header/Plug|
|Type||Wire to Board|