DT Series 2 Position Single Row Female Socket Free Hanging Plug Housing
Description of Changes:The ICT business unit of TE Connectivity is transferring production of part numbers listed in this notice from TE Hemet/CA-USA to TE Tullahoma/TN-USA, TE Empalme/Mexico, or TE externally approved supplier. Shipping point will change from Ontario, CA, USA to Greensboro, NC, USA or Hermosillo, Mexico. These PNs are TE proprietary designs, therefore considered catalog/general market product. Tools that manufacture parts within this PCN are identified as "swing tool" and TE reserves the right in future to move tool to a TE ICT Manufacturing location and/or a TE externally approved supplier as needed. In case of subsequent transfer of swing tool, PCN will be sent to notify with zero day wait period. PPAP and/or sample requests must be submitted within 14 days of PCN submission via email@example.com or TE e-PPAP system. Reason for Changes: This change is necessary for alignment of overall manufacturing capacity and footprint to better meet our Customer's needs. IMPORTANT: The change will not impact fit, form or function
Description of Changes The Industrial and Commercial Transportation business unit of TE Connectivity is adding new capacity tooling for the front seal of the part number(s) listed in this notice. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via firstname.lastname@example.org or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The new tooling is necessary to increase capacity to produce these parts and increase our ability to supply products on time. The added tooling does not impact connector performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use.Shipments of both configurations may be mixed.
DEUTSCH DT2pin and 3pin Plug and Receptacles (with welded caps) Identification and Date Code Marking Addition. Description of Changes Part number identification and date code marking to be added to the housings of parts manufactured in the TEC Suzhou (China) location. Product drawings DT04-2P-XXXX, DT04-3P-XXXX, DT06-2S-XXXX, DT06-3S-XXXX add note 8. ADDITIONAL MARKING PER NOTE 4 AND 7 EXCLUSIVELY FOR PARTS WITH CAPS PRODUCED IN CHINA.
General Product Description: DEUTSCH DT2pin and 3pin Plug and Receptacles (with welded caps) Identification and Date Code Marking Addition. Description of Changes Part number identification and date code marking (see pictures attached) to be added to the housings of parts manufactured in the TEC Suzhou (China) location. Reason for Changes: In order to identify parts manufactured in the TEC Suzhou China facility we are adding part number marking per the images above. This change affects only the appearance on DT2 and DT3 plug and receptacle connectors. Form, fit and function are not affected by this additional marking. Shipments of both versions may be mixed. IMPORTANT: This is a continual improvement, the current and previous revisions of these parts can be used interchangeably in the field. The additional identification is being phased in gradually and previous revisions can remain stocked until use. A note will be added to the product drawing to indicate that the marking is optional and to be used only when parts are manufactured in China. Reference PCN Aug2017 E-17-010843. First Date To Ship (Changed Parts Only): 01-APR-2019Last Date for Mixed Shipments: (Changed Parts Only): 01-JAN-2025
Description of Changes:The Industrial and Commercial Transportation (ICT) business unit of TE Connectivity (TEC) will be updating the new tabulate product drawings to include weld cap versions. Reason for Changes: Document Clarification. Dear Customer, in an effort to continuously improve our product documentation, TE-ICT has updated the new tabulate product drawings to include the weld cap versions prior to start of production. IMPORTANT: This is documentation clarification and does not affect part fit, form or function. All products in stock and field are not affected and can be used interchangeably in the field. See attached PCN E-17-010843 for reference.
The Industrial and Commercial Transportation (ICT) business unit of TE Connectivity (TEC) will be adding to existing North America (NA) based footprint for standard DEUTSCH DT 2pin and 3pin plug and receptacle connectors. Footprint additions are: TEC Suzhou (China) and TEC Empalme, SON (Mexico). Production location will be based on product type for connectors with or without rear caps. All manufacturing plants are ISO/TS 16949 certified. Also, part of this initiative will be some design changes. Plug front seals will use seal retention version, improved product marking and date coding. Legacy DEUTSCH part numbers remain same, PN revision change only, raw material-color remain same, interchangeable and backwards compatible. Box package will change to use standard automotive AIAG compliant box size. See attached presentation and product drawings for more information. Reason for Changes: Product Improvement. Dear Customer, TEC-ICT global product supply has continued to grow outside of NA markets. In response to this change, TEC-ICT is implementing a local-for-local footprint strategy to better support these global market trends. Advantages are shorter lead-times, simplified logistics and flexibility to support local markets.
DEUTSCH CONNECTORS AND TERMINALS Description of Changes: Change of Part number of some items ONLY FOR BRAZIL Reason for Changes:Product improvement. Due a improvement of the process of reduction of MOQ (Minimum Order Quantity) as well as in attendance to the AEO (Authorized Economic Operator),we will effect the fractionation process of packaging of some items imported into TE Connectivity Brazil. For this new process some Part Numbers and NCM code (MercosurCommon Nomenclature) of products (ANNEX I) will be change. This amendment is necessary for the correct compliance with Brazilian legislation, given the way the nationaland international requirements of compliance. Therefore, we request the kindness to communicate these changes to all relevant areas of the your company, because it will benecessary to update to the new Part Numbers and NCM code in your system. The old Part Numbers can no longer be marketed. If the Part Numbers and NCM codes proposedare already in compliance with the registered by your company, the information present can be ignored.
On Order:Order inventroy details 3,200
Factory Stock:Factory Stock: 0
Inventory held at our manufacturer's warehouse. Subject to availability and transit time.
Factory Lead Time: N/A
|No of Positions||2|
|No of Rows||1|
|Style/Orientation||Free Hanging Receptacle|
|Fastening Type||Latch Lock|