Manufacturer Part #
Heat Shrink Tubing ST Polyolefin Black Thin Loose Piece
Tubing products impacted by new Prop 65 Description of Changes This PCN is to inform our customers of additional labelling on some Tubing products. The requirements of the Proposition 65 (Prop 65) a Californian Safe water and Toxic Enforcement Act of 1986 now requires that we warn customers that some of our tubing products contain Antimony in the material make up. This requirement only applies to customer in California. However, as TE cannot predict which products will arrive with customers in California we have to label all Antimony containing products, of course these products will be delivered also to customers outside of California. No Action needs to be taken by our customers outside of California unless the products you receive are directly being forwarded through the supply chain to further customer in California USA in which case the warning must accompany the product.
General Product Description: Change of pickup location for Trutnov sourced ES2000 and ATUM parts. Description of Changes Pickup location of ES2000 and ATUM parts will change from TE's WCDC in Ontario, CA to PADC in Mechanicsburg, PA. To be tied to PCN P-18-015354 and P-18-015360 that stated change of manufacturing location for these parts. Reason for Changes: Product improvement.Parts listed in this change notice were previously manufactured at TE's facility at Menlo Park, CA. Since this facility is being closed, manufacturing has been moved to Trutnov, Czech Republic. Changing pickup location to PADC will shorten LT of Made to Order parts by 2 weeks, as shipments from Trutnov arrive on the East Coast of the US by ocean transit. New LT for PADC was already communicated on notifications about manufacturing location change.
Description of Changes:Please note - This PCN supersedes PCN P-17-015222. Due to a system error PCN P-17-015222 may not have been distributed to all concerned. Manufacturing location changeThis notification is to inform our customers that TE Connectivity is closing our Menlo Park facility in USA and moving the production to our Trutnov facilities in Czech Republic and our Shanghai facility in China. The receiving facility in Shanghai is already an established Heat Shrinkable Tubing ("Tubing" or "Products") manufacturing site manufacturing Tubing since 1996, and the receiving facility in Trutnov is already an established as a Heat Shrinkable Tubing ("Tubing" or "Products") manufacturing site with Trutnov facility manufacturing Tubing since 2008. Reason for Changes: Dear Customer, we hereby inform you about a transfer of processes. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products. A TE-internal release test based on the relevant part specifications will be executed before delivery. As part of the production move, we will start to ship ES2000 products from 21st March 2018 from the Trutnov & Shanghai facilities. After this date TE reserves the right to provide qualified products from any of the manufacturing locations during this transfer until the final closure date of Menlo Park location by the end of 2019. As not all part numbers will transfer at the same time customers may still receive products from the Menlo Park location after this transfer date due to the inventory we will carry to allow this transfer to happen and to minimize
Description of Changes:Manufacturing location change:Part Numbers listed in this notification will be transferred from our Menlo Park facility in USA and moving the production to our Trutnov facilities in Czech Republic and our Shanghai facility in China. Reason for Changes: Dear Customer, TE apologises for the reduced notice period, this is due to a system issue. Previous notifications (P-17-015222, and P-18-015325) had been entered but may not have been received by yourselves. TE informs you about a transfer of processes. As part of the production move, we will start to ship ES2000 products after 21st March 2018 from the Trutnov facility. After this date TE reserves the right to provide qualified products from either the Menlo Park or Trutnov manufacturing locations. As not all part numbers will transfer at the same time, customers may still receive Products from the Menlo Park location after this transfer date due to inventory we will carry to allow this transfer to happen and to minimize impact to our tubing customers. Where necessary TE will continue with internal qualification and testing of products after they are received at the new locations. The Unit of Measure for ES2000 coiled parts will also change from Feet to pieces. 1 coil = 1 piece.