NXP | NX3L1G53GT,115

The NX3L1G53GT,115 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer.

This module has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt trigger action at the digital input makes the circuit tolerant to slower input rise and fall times.

Features and benefits:

• Wide supply voltage range from 1.4 V to 4.3 V
• Very low ON resistance (peak):
  • 1.6 Ω (typical) at VCC = 1.4 V
  • 1.0 Ω (typical) at VCC = 1.65 V
  • 0.55 Ω (typical) at VCC = 2.3 V
  • 0.50 Ω (typical) at VCC = 2.7 V
  • 0.50 Ω (typical) at VCC = 4.3 V
• Break-before-make switching
• High noise immunity
• ESD protection:
  • HBM JESD22-A114F Class 3A exceeds 7500 V
  • MM JESD22-A115-A exceeds 200 V
  • CDM AEC-Q100-011 revision B exceeds 1000 V
  • IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
• CMOS low-power consumption
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
• Direct interface with TTL levels at 3.0 V
• Control input accepts voltages above supply voltage
• High current handling capability (350 mA continuous current under 3.3 V supply)
• Specified from −40 °C to +85 °C and from −40 °C to +125 °C