onsemi | FXLH42245MPX

The FXLH42245MPX is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6 V to as low as 1.1 V

The A port tracks the VCCA level and the B port tracks the VCCB level. Both ports are designed to accept supply voltage levels from 1.1 V to 3.6 V. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V.

Features:

• BBi-Directional Interface between Two Levels from 1.1 V to 3.6 V
• Fully Configurable, Inputs Track VCC Level
• Non-Preferential Power-up; Either VCC May Be Powered-up First
• Outputs Remain in 3-State until Active VCC Level is Reached
• Outputs Switch to 3-State if Either VCC is at GND
• Bushold on Data Inputs Eliminates the need for External Pull-Up / Pull-Down Resistors
• 26W Output Series Resistors on the B Port to Reduce Line Noise
• Power-Off Protection
• Control Inputs (T/R, OE) Levels are Referenced To VCCA Voltage
• Packaged in 24-Pin MLP
• ESD Protection Exceeds:
• 4 kV Human Body Model
• 8 kV Human Body Model
• 1 kV Charge Device Model
• 200 V Machine Model
• 1 kV CDM ESD
• 200 V MM ESD

Applications:

• Automation
• Broadband Access
• Consumer Appliances
• Desktop PC

View the available Series of 2-Bit Signal Translators