Manufacturer Part #
23K256-I/SN
23K256 Series 2.7 V to 3.6 V 256 kbit SPI Bus Low-Power Serial SRAM - SOIC-8
| | |||||||||||
| | |||||||||||
| Mfr. Name: | Microchip | ||||||||||
| Standard Pkg: | Product Variant Information section Available PackagingPackage Qty:100 per Tube Package Style:SOIC-8 Mounting Method:Surface Mount | ||||||||||
| Date Code: | 2533 | ||||||||||
Microchip 23K256-I/SN - Product Specification
Shipping Information:
ECCN:
PCN Information:
Microchip has released a new Datasheet for the 23A256/23K256 - 256-Kbit SPI Bus Low-Power Serial SRAM of devices. If you are using one of these devices please read the document located at 23A256/23K256 - 256-Kbit SPI Bus Low-Power Serial SRAM.Notification Status: FinalDescription of Change: Updated section 2.1: ?Principles of Operation?.Impacts to Data Sheet: See above detailsReason for Change: To Improve ProductivityChange Implementation Status: CompleteDate Document Changes Effective: 13 Oct 2023NOTE: Please be advised that this is a change to the document only the product has not been changed.Markings to Distinguish Revised from Unrevised Devices: N/A
Part Status:
Microchip 23K256-I/SN - Technical Attributes
| Memory Density: | 256kbps |
| Memory Organization: | 32 K x 8 |
| Supply Voltage-Nom: | 2.7V to 3.6V |
| Operating Temperature: | -40°C to +85°C |
| Storage Temperature Range: | -65°C to +150°C |
| Package Style: | SOIC-8 |
| Mounting Method: | Surface Mount |
Features & Applications
The 23X256 are 256 Kbit Serial SRAM devices. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input.
Communication to the device can be paused via the hold pin (HOLD). While the device is paused, transitions on its inputs will be ignored, with the exception of Chip Select, allowing the host to service higher priority interrupts. The 23X256 is available in standard packages including 8-lead PDIP and SOIC, and advanced packaging including 8-lead TSSOP.
Features:
- Max. Clock 20 MHz
- Low-Power CMOS Technology: - Read Current: 3 mA at 1 MHz - Standby Current: 4 μA Max. at 3.6 V
- 32,768 x 8-bit Organization
- 32-Byte Page
- HOLD pin
- Flexible Operating modes: - Byte read and write - Page mode (32 Byte Page) - Sequential mode
- Sequential Read/Write
Available Packaging
Package Qty:
100 per Tube
Package Style:
SOIC-8
Mounting Method:
Surface Mount