Microchip | PIC24FJ256DA110-I/BG

The PIC24FJ256DA110-I/BG is part of the PIC24F Series family with  256 kB Flash as a 16-Bit Flash Microcontroller.It can sustain standard temperature ranges from -40 to 125 and has 121 pin in a BGA package.

This is Ideal for Graphical interface applications that can benefit from the integrated Graphics, 24K byte RAM for frame buffer, mTouch, USB and other peripherals.

Features:

• Graphics Controller Features:
  •   3x Graphics Hardware Acceleration Units.
  •   Color Look-up Table (CLUT) with Maximum of 256 Entries.
  •   Direct Interface to Monochrome, C-STN, TFT, OLED.
  •   Resolution up to 640x480 30 Hz, 16 bpp, or 480x272 60 Hz, 16 bpp.
• Universal Serial Bus Features:
  •   USB v2.0 On-The-Go (OTG) Compliant.
  •   Dual Role Capable – Can act as either Host or Peripheral.
  •   Low-Speed (1.5 Mbps) and Full-Speed (12 Mbps) USB Operation in Host mode.
  •   Full-Speed USB Operation in Device mode.
• Analog Features:
  •   Up to 24x, Capacitive touch sensing.
  •   Up to 24x, 10-Bit, ADC at 500 ksps.
  •   3x Analog Comparators with Programmable Input/Output Configuration.
• Power Management:
  •   On-Chip Voltage Regulator of 1.8 V.
  •   Switch between Clock Sources in Real Time.
  •   Idle, Sleep and Doze modes with Fast Wake-up and Two-Speed Start-up.
  •   Run Mode: 800 uA/MIPS, 3.3 V Typical.
  •   Sleep mode Current Down to 20 uA, 3.3 V Typical.
  •   Standby Current with 32 kHz Oscillator: 22 uA, 3.3 V Typical.??