STMicroelectronics | STM32F205RBT6

The STM32F205RBT6 is a part of STM32 Series ARM-based 32-bit Microcontroller with 150 DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera. It has an Operating temperature ranges b/w -40 °C to 85 °C and available in a 36-LQFP Package.

The STM32F20x family is based on the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a frequency of up to 120 MHz. The family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

Features:

• Core: ARM 32-bit Cortex™-M3 CPU with Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution performance from Flash memory, frequency up to 120 MHz, memory protection unit, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
• Memories
  • Up to 1 Mbyte of Flash memory
  • 512 bytes of OTP memory
  • Up to 128 + 4 Kbytes of SRAM
  • Flexible static memory controller that
  • supports Compact Flash, SRAM, PSRAM NOR and NAND memories
  • LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management
  • From 1.65 to 3.6 V application supply and I/Os
  • POR, PDR, PVD and BOR
  • 4 to 26 MHz crystal oscillator
  • Internal 16 MHz factory-trimmed RC (1% accuracy at 25 °C)
  • 32 kHz oscillator for RTC with calibration
  • Internal 32 kHz RC with calibration
• Low power
  • Sleep, Stop and Standby modes
  • VBAT supply for RTC, 20 × 32 bit backup
• registers, and optional 4 KB backup SRAM
• 3 × 12-bit, 0.5 μs A/D converters
  • up to 24 channels
  • up to 6 MSPS in triple interleaved mode
• Debug mode
  • Serial wire debug (SWD) & JTAG interfaces
  • Cortex-M3 Embedded Trace Macrocell™
• 8- to 14-bit parallel camera interface: up to 48 Mbyte/s
• CRC calculation unit
• 96-bit unique ID
• Analog true random number generator

Applications:

• Motor drive and application control
• Medical equipment
• Industrial applications: PLC, inverters, circuit breakers
• Printers, and scanners
• Alarm systems, video intercom, and HVAC