Les commandes expédiées à l’extérieur des États-Unis seront en attente pendant que l’entreprise évalue les impacts tarifaires.Veuillez contacter votre vendeur pour obtenir de l’aide.
Livraison gratuite aux États-Unis continentaux à partir de 50 $ US. Des conditions s'appliquent
Référence fabricant
282087-1
3 Position Housings Plug Black Free Hanging 6.00mm Pitch Rectangular Connector
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | TE Connectivity | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :1 par Bag Méthode de montage :Wire Mount | ||||||||||
| Code de date: | 2440 | ||||||||||
TE Connectivity 282087-1 - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
General Product Description:AMP SUPERSEAL 1.5 SERIES 3P PLDescription of ChangesWe hereby inform you that the housing part number 282058-1, used in connector 282087-1, will undergo a drawing update through this PCN. The update included the alternative material PBT-GF15 for TE Brazil production as an already approved option. This change is being made to align with the raw material PBT-GF15 already in long-term used in TE EMEA location.Reason for Changes:Document clarification.Dear Customer, as result of our continuous strive for improving our processes, we hereby inform you about this update. The new source is executed by following a strict procedure, which guarantees no negative influence on quality, ability to supply and form-fit-function of the concerned products. Please after receiving this notification, PPAP and samples must be requested by ePPAP System in 10 days, in case you do not request in ePPAP, TE will understand that this change was accepted.First Date To Ship (Changed Parts Only):26-NOV-2025
Description of Changes: This Product Change Notification (PCN) is to inform about capacity enhancement for Tool related to PNs, that can be found below in this PCN according to Trigger Matrix 17. Production will run in approved location. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. Internal release process is ensured by TE. The product in scope of this PCN is a general sales product. The change has no impact to form-fit-function. Therefore, this is an informational PCN only, and no PPAP will be submitted externally. Deliveries will be started after internal validation and release process are complete.Reason for Changes: Product improvement.As a result of a thorough analysis of demand picture matching our customer needs we are going to optimize production capacity for affected PNs.
General Product Description:3 POS - AMP SUPERSEAL 1.5 SRS. PLUG ASSY.Description of ChangesThis Product Change Notification (PCN) is to inform you about a resin supplier base extension for the 3pos Plug housing of the mentioned part numbers, which are under the design responsibility of TE Connectivity. This PCN is informational only and no further actions are necessary from your side, as this extension does not have any impact to form, fit or function change. The material itself will remain PA66-GF as stated on the general TE customer drawing. The PN in scope of this PCN is a general sales / catalogue part. Therefore, no contractual agreement related to sub-supplier selection is applicable. VDA 2 Trigger matrix use case 30 and PPAP towards customer/s are not applicable too. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. Internal release process is ensured by TE, including product validation.Reason for Changes:Part status change.The supplier base extension is needed to protect our customers and TE Connectivity from material shortages risks and ensure deliveries. Alternative resin/material introduced is a recompound resin (PA66-GF), whose industrial grade quality is under TE control. The TE Connectivity choice is also consistent with the efforts for reducing the CO2 content of our products and build a sustainable future. These products with recompound resin have been tested according to the relevant specifications and meet the product specific requirements.
General Product Description:Multiple part numbersDescription of ChangesAdding TE Kunshan for alternate manufacturing source. PN is currently in series production at that location.Reason for Changes:Product improvement.Additional part source to improve delivery constraints.First Date To Ship (Changed Parts Only: 14-APR-2023
Statut du produit:
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=fr&field2=282087-1&field4=TE Connectivity&field18=https://p1na.futureelectronics.com/fr/de/p/interconnect--connector-tools-contacts-accessories/282087-1-te-connectivity-9021528
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=fr&field2=282087-1&field4=TE Connectivity&field18=https://p1na.futureelectronics.com/fr/de/p/interconnect--connector-tools-contacts-accessories/282087-1-te-connectivity-9021528
TE Connectivity 282087-1 - Caractéristiques techniques
| Type: | Contact |
| Contact Termination: | Crimp Terminal |
| No of Positions: | 3 |
| Color: | Black |
| Operating Temp Range: | -40°C to +125°C |
| Voltage Rating: | 24V |
| Méthode de montage : | Wire Mount |
Fonctionnalités et applications
The 282087-1 is a part of Superseal 1.5 Series Polyamide 6.6 Glass 3 Position Plug Housing Connector
Product Type Features:
- Product Type = Connector
- Product Line = Super Seal
- Number of Positions = 3
- Secondary Lock Material = Polyamide 6.6 Glass Filled
- Secondary Lock Color = Red
- Seal Material = Silicone Rubber
- Seal Color = Yellow
- Preloaded = No
- Accepts Contact Gender = Receptacle
- Connector Style = Plug
- Housing Color = Black
- Housing Material = Polyamide 6.6 GF
Emballages disponibles
Qté d'emballage(s) :
1 par Bag
Méthode de montage :
Wire Mount