Macronix | MX25L1606EM1I-12G

The MX25L1606EM1I-12G is a Part of MX25L Series, a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus and its temperature range from -40°C to 85°C.

Features:

• Single Power Supply Operation
  •  2.7 to 3.6 volt for read, erase, and program operations
• Serial Peripheral Interface compatible -- Mode 0 and Mode 3
• 8M: 8,388,608 x 1 bit structure or 4,194,304 x 2 bits (Dual Output mode) structure
• 16M: 16,777,216 x 1 bit structure or 8,388,608 x 2 bits (Dual Output mode) structure
• 256 Equal Sectors with 4K byte each (8 Mb)
• 512 Equal Sectors with 4K byte each (16 Mb)
  •  Any Sector can be erased individually
• 16 Equal Blocks with 64K byte each (8 Mb)
• 32 Equal Blocks with 64K byte each (16 Mb)
  •  Any Block can be erased individually
• Program Capability
  •  Byte base
  •  Page base (256 bytes)
• Latch-up protected to 100mA from -1 V to Vcc +1 V

Applications:

• High Performance
  •  Fast access time: 86 MHz serial clock
  •  Serial clock of Dual Output mode : 80 MHz
  •  Fast program time: 1.4 ms(typ.) and 5 ms(max.)/page
  •  Byte program time: 9us (typical)
  •  Fast erase time: 60ms(typ.) /sector  0.7s(typ.) /block
• Low Power Consumption
  •  Low active read current 16 Mb: 25 mA(max.) at 86 MHz; 8 Mb: 12 mA(max.) at 86 MHz
  •  Low active programming current: 20 mA (max)
  •  Low active erase current 20 mA (max)
  •  Low standby current 50uA (max)
  •  Deep power-down mode 5uA (typical)
• Typical 100,000 erase/program cycles
• 20 years of data retention