Microchip | PIC24FJ64GB106-I/PT

PIC24FJ64GB106-I/PT is part of the PIC24FJ64 Series family with 64 kB Flash as a 16-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +85°C and has 53 i/o pins in a TQFP package.

Features:

• CPU:     
  • Up to 16 MIPS performance.    
  • 16 x 16 Hardware Multiply, Single Cycle Execution.    
  • 12-bit x 16-bit Hardware Divider.     
  • C Compiler Optimized Instruction Set.
• nanoWatt Power Managed Modes:     
  • Run, Idle and Sleep modes.     
  • Multiple, Switchable Clock Modes for Optimum Performance and Power Management.     
  • Run mode: 1 mA/MIPS, 2.0 V Typical.    
  • Sleep mode Current Down to 100 nA Typical.     
  • Standby Current with 32 kHz Oscillator: 2.5 uA, 2.0 V typical.
• Flash Program Memory:    
  • Self-Reprogrammable under Software Control.    
  • 10,000 erase/write cycles.    
  • 20 year data retention.     
  • EEprom emulation capable.
• System:     
  • Internal oscillator support.
  • 31 kHz to 8 MHz, up to 32 MHz with 4X PLL.    
  • On-chip LDO Voltage Regulator.     
  • JTAG Boundary Scan and Flash Memory Program Support.     
  • Fail-Safe Clock Monitor.
  • allows safe shutdown if clock fails.     
  • Watchdog Timer with separate RC oscillator.
• Analog Features:    
  • 10-bit ADC, 16 channels, 500 k samples per second.     
  • Three Analog comparators.
• Universal Serial Bus Features:    
  • USB v2.0 On-the-Go compliant.    
  • Dual role capable, can act as either Host or Device.     
  • Low speed (1.5 Mb/s) and full speed (12 Mb/s) operation in host mode.    
  • Full speed USB operaton in Device mode.    
  • Supports 32 endpoints.    
  • On-chip USB transceiver.