STMicroelectronics | STM8L152K6U6

It feature embedded data EEPROM and low power low-voltage single-supply program Flash memory. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.

Features:

• Operating conditions
  • Operating power supply: 1.65 to 3.6 V (without BOR), 1.8 to 3.6 V (with BOR)
  • Temperature range: -40 to 85 or 125 °C
• Low power features
  • 5 low power modes: Wait, Low power run, Low power wait, Active-halt with RTC, Halt
  • Ultralow leakage per I/0: 50 nA
  • Fast wakeup from Halt: 5 μs
• Advanced STM8 core
  • Harvard architecture and 3-stage pipeline
  • Max freq: 16 MHz, 16 CISC MIPS peak
  • Up to 40 external interrupt sources
• Reset and supply management
  • Low power, ultrasafe BOR reset with 5 selectable thresholds
  • Ultralow power POR/PDR
  • Programmable voltage detector (PVD)
• Clock management
  • 32 kHz and 1-16 MHz crystal oscillators
  • Internal 16 MHz factory-trimmed RC
  • Internal 38 kHz low consumption RC
  • Clock security system
• Low power RTC
  • BCD calendar with alarm interrupt
  • Digital calibration with +/- 0.5 ppm accuracy
  • LSE security system
  • Auto-wakeup from Halt w/ periodic interrupt
• Memories
  • Up to 8 Kbytes of Flash program memory plus 256 bytes of data EEPROM with ECC
  • Flexible write/read protection modes
  • 1 Kbyte of RAM
• DMA
  • 4 channels supporting ADC, SPI, I2C, USART, timers
  • 1 channel for memory-to-memory
• 12-bit ADC up to 1 Msps/28 channels
  • Temp. sensor and internal ref. voltage
• 2 ultralow power comparators
  • 1 with fixed threshold and 1 rail to rail
  • Wakeup capability
• Timers
  • Two 16-bit timers with 2 channels (IC, OC, PWM), quadrature encoder (TIM2, TIM3)
  • One 8-bit timer with 7-bit prescaler (TIM4)
  • 1 Window and 1 independent watchdog
  • Beeper timer with 1, 2 or 4 kHz frequencies
• Communication interfaces
  • One synchronous serial interface (SPI)
  • Fast I2C 400 kHz
  • One USART Up to 41 I/Os, all mappable on interrupt vectors
  • Up to 20 capacitive sensing channels supporting touchkey, proximity touch, linear touch, and rotary touch sensors
• Development support
  • Fast on-chip programming and non-intrusive debugging with SWIM
  • Bootloader using USART
• 96-bit unique ID