Semtech | SC620ULTRT

The SC620 is a multi-purpose LED driver with eight identical, independently controlled current sinks. Each current sink can drive an LED by connecting the LED’s anode to the system power supply and the cathode to the current sink input pin. Any combination of outputs can be enabled or disabled for optimal design flexibility.

The SC620 also employs an adjustable global current gain setting register to allow the current setting step size to vary from 31.25µA to 500µA. This provides a wide range of options for LED variation and dimming functions. The maximum output is also scaled by this step size, with a maximum of 25mA at the highest step setting. Multi-colored and white LEDs with diff erent forward voltages can be driven using the same SC620 due to its floating cathode technology. This feature allows each output pin to vary in voltage from 150mV to VIN - 1.5V. All current control is programmed using an I2C interface bus. Only a single input bypass capacitor is required — no other external resistors or capacitors are needed. The 3mm x 3mm MLPQ package and minimal support components make the SC620 an ideal solution for low-cost, area-conscious
backlighting designs.

Key Features:

• Eight identical current drivers with independent control
• Wide current setting range - 31.25µA to 25mA
• 5% current matching, 7% accuracy
• I2C interface for microprocessor control
• I2C slave address 1110 000x
• Less than 1µA quiescent current in shutdown
• Low dropout voltage: = 150mV
• Over-temperature protection
• MLPQ-UT-16 package (3mm x 3mm)
• Ultra-thin 0.6mm maximum package height
• Fully WEEE and RoHS compliant

Applications:

• LCD backlighting LED driver
• Multicolor and RGB LED driver
• General purpose current sink array
• General purpose digital output (open-drain) expander
• Auto-focus voice-coil driver

To learn more about the SC620 product family, Click Here