Manufacturer Part #
MCP79520-I/MS
MCP7952X Series 3 V SPI Real-Time Clock Calendar with Battery Switchover
|
|
|||||||||||
|
|
|||||||||||
| Mfr. Name: | Microchip | ||||||||||
| Standard Pkg: |
Product Variant Information section
Available PackagingPackage Qty:100 per Tube Package Style:MSOP-10 Mounting Method:Surface Mount |
||||||||||
| Date Code: | 2547 | ||||||||||
Microchip MCP79520-I/MS - Product Specification
Shipping Information:
HTS Code:
ECCN:
PCN Information:
Microchip has released a new Datasheet for the MCP7951X/MCP7952X - Battery-Backed SPI Real-Time Clock/Calendar Data Sheet of devices. If you are using one of these devices please read the document located at MCP7951X/MCP7952X - Battery-Backed SPI Real-Time Clock/Calendar Data Sheet.Notification Status: FinalDescription of Change: Update OUI description and temperature range name.Impacts to Data Sheet: See above detailsReason for Change: To Improve ProductivityChange Implementation Status: CompleteDate Document Changes Effective: 23 Nov 2023NOTE: Please be advised that this is a change to the document only the product has not been changed.Markings to Distinguish Revised from Unrevised Devices::N/A
Part Status:
Microchip MCP79520-I/MS - Technical Attributes
| Date Format: | YY:MM:DD |
| Time Format: | HH:MM:SS:hh |
| Interface: | SPI |
| Non-Volatile Memory Size: | 64B |
| Supply Voltage-Nom: | 1.8V to 3.6V |
| Temperature Grade: | Industrial |
| Operating Temp Range: | -40°C to +85°C |
| Storage Temperature Range: | -65°C to +150°C |
| Package Style: | MSOP-10 |
| Mounting Method: | Surface Mount |
Features & Applications
This device is fully accessible through the serial interface, while VCC is between 1.8V and 3.6V, but can operate down to 1.3 V through the backup supply connected to the VBAT input for timekeeping and SRAM retention only.
Features:
- Low Power Operation-VCC Min = 1.8 V-Icc < 5 µA Typical Standby Current
- Low Backup Power-VBAT Min = 1.3 V-Ibat < 700nA Typical Timekeeping & SRAM Retention Current
- Automatic Battery Switchover with Timestamp-VCC to VBAT(VCC Lost)-VBAT to VCC (VCC Restored)
- Dual configurable alarms with a 0.01 sec count on one alarm-IRQ (VCC or VBAT)
- Clock Out frequencies: 32.768, 8.192 & 4.096 KHz and 1 Hz
- Digital Trimming Range from -255 to + 255 ppm in 1 ppm steps-Adjusts up to 22 seconds/day
- EEPROM as 8 Bytes/Page with Block Sector write protection-Protect:None, 1/4, 1/2 or all of array
- Factory standard MAC address programming or custom ID available
Available Packaging
Package Qty:
100 per Tube
Package Style:
MSOP-10
Mounting Method:
Surface Mount