onsemi | MC100EPT26DG

The MC100EPT26 is a 1:2 Fanout Differential LVPECL/LVDS to LVTTL translator. Because LVPECL (Positive ECL) or LVDS levels are used only +3.3 V and ground are required. The small outline 8-lead package and the 1:2 fanout design of the EPT26 makes it ideal for applications which require the low skew duplication of a signal in a tightly packed PC board.

The VBB output allows the EPT26 to be used in a single-ended input mode. In this mode the VBB output is tied to the D0 input for a non-inverting buffer or the D0 input for an inverting buffer. If used, the VBB pin should be bypassed to ground with > 0.01 µF capacitor. For a single-ended direct connection, use an external voltage reference source such as a resistor divider. Do not use VBB for a single-ended direct connection or port to another device.

Key Features:

• 1.4 ns Typical Propagation Delay
• Maximum Frequency > 275 MHz Typical
• The 100 Series Contains Temperature Compensation
• Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V
• 24 mA TTL outputs
• Q Outputs Will Default LOW with Inputs Open or at VEE
• VBB Output
• Pb-Free Packages are Available

Learn more about the MC100EPTxx Family of Translators