Référence fabricant
AP8803WTG-7
AP8803 Series 1 A 30 V 700 kHz Surface Mount LED Step-Down Converter - TSOT-23-5
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | Diodes Incorporated | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :3000 par Reel Style d'emballage :TSOT-23-5 Méthode de montage :Surface Mount | ||||||||||
| Code de date: | |||||||||||
Diodes Incorporated AP8803WTG-7 - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Statut du produit:
Diodes Incorporated AP8803WTG-7 - Caractéristiques techniques
| Supply Voltage: | 8V to 30V |
| Output Current per Channel: | 1A |
| Switching Frequency-Max: | 700kHz |
| Style d'emballage : | TSOT-23-5 |
| Méthode de montage : | Surface Mount |
Fonctionnalités et applications
Diodes Incorporated is a leading global manufacturer and supplier of high-quality, application-specific standard products within the broad discrete and analog semiconductor markets, serving the consumer electronics, computing, communications, industrial and automotive markets.
The AP8803 is a step-down DC/DC converter designed todrive LEDs with a constant current. The device can drive up to 7 LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 8V to 30V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The AP8803 switches at frequency up to 700kHz. This allows the use of small size external components, hence minimizing the PCB area needed.
The AP8803 is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to 7 LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 8V to 30V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The AP8803 switches at frequency up to 700kHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8803 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.2V or lower at CTRL shuts down the output at SW and puts the device into a low-current standby state.Emballages disponibles
Qté d'emballage(s) :
3000 par Reel
Style d'emballage :
TSOT-23-5
Méthode de montage :
Surface Mount