Microchip | MIC4120YME

MIC4120YME and MIC4129 MOSFET drivers are tough, efficient, and easy to use. The MIC4129 is an inverting driver, while the MIC4120 is a non-inverting driver. The MIC4120 and MIC4129 are improved versions of the MIC4420 and MIC4429. They are capable of 6 A (peak) output and can drive the largest MOSFETs with an improved safe operating margin.

The MIC4120/4129 accept any logic input from 2.4 V to VS without external speed-up capacitors or resistor networks. Proprietary circuits allow the input to swing negative by as much as 5 V without damaging the part. Additional circuits protect against damage from electrostatic discharge. MIC4120/4129 drivers can replace three or more discrete components, reducing PCB area requirements, simplifying product design, and reducing assembly cost. Modern BiCMOS/DMOS construction guarantees freedom from latch-up. The rail-to-rail swing capability insures adequate gate voltage to the MOSFET during power up/down sequencing.

Key Features:

• CMOS Construction.
• Latch-Up Protected: Will Withstand >500 mA.
• Reverse Output Current.
• Logic Input Withstands Negative Swing of Up to 5 V.
• Matched Rise and Fall Times ................... 25 ns
• High Peak Output Current................ 6 A Peak.
• Wide Operating Range .............. 4.5 V to 20 V.
• High Capacitive Load Drive ............10,000 pF.
• Low Delay Time ............................ 55 ns Typ.
• Logic High Input for Any Voltage From 2.4 V to VS.
• ow Equivalent Input Capacitance (typ) ...6 pF.
• Low Supply Current ....................450 µA With Logic 1 Input.
• Low Output Impedance ........................ 2.5 O.
• Output Voltage Swing Within 25 mV of Ground or VS.
• Exposed backside pad packaging reduces heat.
• ePAD SOIC-8L (?JA = 58°C/W).
• 3 mm x 3 mm MFL™-8L (?JA = 60°C/W).

Applications:

• Switch Mode Power Supplies.
• Motor Controls.
• Pulse Transformer Driver.
• Class-D Switching Amplifiers.

To learn more about the MIC4120 product family, Click Here.