Shipping Country
Free shipping within the continental US over $50. Conditions apply
Select Country
Manufacturer Part #
282080-1
Download the CAD models for this product. Learn more about SnapMagic.
1600 per Box
Cable Mount
Shipping Information:
HTS Code:
ECCN:
PCN Information:
General Product Description:Super seal Plug Package changeDescription of ChangesPackaging specifications remain unchanged, changing from small bag packaging to whole bag packaging;Reason for Changes:Product improvement. Product improvement. Part status change. Packaging ImprovementFirst Date To Ship (Changed Parts Only): 03-AUG-2026
General Product Description:PCN_A_01_OthersType of ChangeManufacturing location change, Capacity EnhancementsDescription of ChangesThis Product Change Notification (PCN) is to inform about a subcomponent capacity enhancement tool (molding) in an additional location (TE Shirwal) used to manufacture below listed PNs (according VDA Trigger matrix No. 29 and AIAG section 3.1, item 4. The change has no impact to form-fit-function. No impact on location of saleable parts.TE Change process follows a strict procedure, which fully maintains quality and ability to supply. Internal release process is ensured by TE, including product validation as per OEM/CAM requirements (when applicable). Validation will be initiated and completed according to project plan, as soon as samples are available.PPAP/ PPA and samples will be prepared (as per agreements between the two parties). A request via www.te.com needs to be initiated by Customer within 2 weeks after the creation date of this PCN. In case no request is obtained till above mentioned date, PPAP/ PPA will be considered as approved, and the change is considered as fully released. Reason for Changes:Product improvement.As a result of a through analysis of demand picture, matching our customer needs, we are going to optimize value stream of PN's in scope of this PCN. This change will support the need of our customer for shorter lead-times and optimized value streams.First Date To Ship (Changed Parts Only):18-DEC-2026
General Product Description:Label Template ChangeDescription of Changes- No change to critical information (P/N, batch number, quantity, etc.) - Label content remains consistent with system and packaging specification - This change does not affect product function or performance - Full traceability is maintained after the changeReason for Changes:New specification.The small label template has been updated to optimize layout and readability.First Date To Ship (Changed Parts Only):30-JUN-2026
General Product Description:MCTV import; cancel the stamp on the label, only influence TE china 1043 plantDescription of ChangesMCTV import, cancel the stamp on the label, use MCTV to confirm the inspection operator Reason For Change: Product improvement.MCTV import, cancel the stamp on the label, use MCTV to confirm the inspection operatorFirst Date To Ship (Changed Parts Only):08-FEB-2026
General Product Description:Layout production changeDescription of ChangesDue to the installation requirements for a new production line, it is necessary to relocate PSP MQS and PSP Flex machines to the OVM line area. As a direct consequence of this layout change, the inspection stations and MQS 2 POS assembly machine will also be repositioned to ensure continuous, safe, and efficient production flow.Reason for Changes:This adjustment aims to optimize manufacturing floor space, improve production line integration, and ensure operability of the new line while preventing negative impacts on productivity and process quality.Estimated Dates:First Date To Ship (Changed Parts Only):01-DEC-2025
General Product Description:AMP SUPERSEAL 1.5 SERIES 2P PLDescription of ChangesThis Product Change Notification (PCN) replace the P-25-028925 and applies exclusively to customers who purchase the component through TE Connectivity Brazil. We would like to inform you that the component Housing PN 282057-1, used in the assembly PN 282080-1, will be transitioned to an outsourced manufacturing process. Please note that the assembly PN 282080-1 will continue to be carried out by TE Connectivity. The only change is that TE Connectivity will now incorporate the Housing 282057-1, supplied by a certified external manufacturer, into the assembly process, but TE Connectivity will continue to supply this product to their customersReason for Changes:Dear customer , as result of our continuous strive for improving our process, we hereby inform you about this outsourcing project. This outsourcing is executing by following a strict procedure which garantees no negative influence on quality, ability to supply and form-fit-function of this product. Please after receiving this notification, PPAP and sample must be requested by ePPAP System in 10 days.In case ofyou do not request in ePPAP, TE Connectivity will understand and considered that this change was accepted.First Date To Ship (Changed Parts Only):30-OCT-2025
Description of ChangesThis Product Change Notification (PCN) applies exclusively to customers who purchase the component from TE Connectivity Brazil. We would like to inform you that the component 282057-1, used in the assembly part 282080-1, will be transitioned to an outsourced manufacturing process.Reason for Changes:As result of our continuous strive for improving our process, we hereby inform you about this outsourcing. This outsourcing is executing by following a strict procedure which garantees no negative influence on quality, ability to supply and form-fit-function of this product. Please after receiving this notification, PPAP and samples must be requested by ePPAP System in 10 days. In case of you do not request in ePPAP, TE Connectivity will understand and considered that this change was accepted.First Date To Ship (Changed Parts Only): 15-OCT-2025
Description of ChangesManufacturing location change. Following Part Numbers will be transferred of the TE Connectivity manufacturing location internaly, but in the same building. In addition, this PCN replaces the recently issued PCN No. P-24-027338.Reason for Changes:Dear Customer, for continuous strive for improving our processes, we inform you about a processes transfer. According to PPAP Manual 4th Edition 2006, Section 3 - 3.1 Customer Notification, item 3. Production following upgrade or rearrangement of existing tooling or equipment - Rearrangement is defined as activity that changes the sequence of productand process flow from that documented in the process flow diagram ,including the addition of a new processs. Minor adjustments of production equipment may be required do meet safety requirements such as, installation of protective covers, elimination of potential ESD risks, etc. As described in the manual, since it is only a change in the current position of the machine within the same factory, it does not require the submission of a new PPAP. Submitting the PCN is only the communication of the event within the factory, and does not require additional activities, unless there is a Specific Requirem. for this action.
General Product Description:2 POS. Plug HSG. AMP SUPERSEAL 1.5 SRS..Description of ChangesThis Product Change Notification (PCN) is to inform about a transfer of mold tool(21-0067042) from Supplier Italy to TE Wagholi India. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. Level 2 PPAP /PSW will be prepared and submit for approval, a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCNReason for Changes:As a result of a thorough analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams. "This PCN is limited to TE India customers".
General Product Description:AMP SUPERSEAL 1.5 SERIES 2P PLDescription of ChangesFOR CUSTOMERS IN NA REGION ONLY! Adding TE Kunshan for alternate manufacturing source. PN is currently in series production at that location.Reason for Changes:Product improvement. Additional part source
Part Status:
The 282080-1 is a part of Superseal 1.5 series Polyamide 6.6 Glass 2 Position Plug Black Housing Connector
Product Type Features:
Inventory held at our manufacturer's warehouse. Subject to availability and transit time.
