Shipping Country
Free shipping within the continental US over $50. Conditions apply
Select Country
Manufacturer Part #
DT06-2S
Download the CAD models for this product. Learn more about SnapMagic.
1 per Box
Wire Mount
Shipping Information:
COO is assigned at time of shipping and cannot be selected during the ordering process. All documents will indicate COO at time of shipping
HTS Code:
ECCN:
PCN Information:
Kind of Change:Tooling-Process ChangeProduct Description: DEUTSCH DT Series Plug and Receptacle New Capacity Assembly LineDescription of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is adding a new manual capacity assembly line for the part number(s) listed on the attached SPCN document .TE facility located in Tullahoma, TN, USA. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Representative samples will be offered for each pin arrangement as detailed in the attached document. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) is not affected.Reason for Changes: The new manual assembly line is necessary to improve operating efficiency in the current manufacturing location. The added assembly line does not impact connector performance. IMPORTANT: No fit, form or function change. Parts off the new assembly line are identical to current production. Shipments from current and new tooling configurations may be mixed.First Ship Date of Changed Items (Changed Parts Only):13-JUL-2026Effectivity Date:13-JUL-2026Date of First Samples:29-JUN-2026
Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is adding new capacity tooling in TE Empalme, SON, MEX for the housing of the part numbers.Reason for Changes:TE hereby inform you of this change. The new tooling is necessary as a result of global demand. The added tooling does not impact connector performance. IMPORTANT: No fit, form, or function change. Parts off the new tool are identical to current production. Shipments from current and new tooling configurations may be mixed.First Ship Date of Changed Items (Changed Parts Only): 04-FEB-2026
Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is making a change to streamline the use of the TE labeled housings within the 2-position product family for the part number(s).Reason for Changes:TE hereby inform you of this change. The change is necessary to streamline the use of the TE labeled housings within the 2-position product family. The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations can be mixed.First Ship Date of Changed Items (Changed Parts Only): 26-JAN-2026Last Date for Mixed Shipments: (Changed Parts Only): 31-JUL-2026
Product Description: DEUTSCH DT Plug and Receptacle Family Customer DrawingsGeneral Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is making a minor drawing change to standardize information for the product drawing(s) listed in affected products.Reason for Changes:Dear Customer, we hereby inform you of this drawing change. The change is necessary to improve our documentation on out product drawings related to the parts listed . The change does not impact product design or performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually, and previous revision can remain stocked until use. Shipments of both configurations may be mixed.First Ship Date of Changed Items (Changed Parts Only):12-SEP-2025
Description of Changes: The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to add an alternate tab geometry for the part number(s) listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) are affected.Reason for Changes:Dear Customer, we hereby inform you of this cosmetic change. The change is necessary to add an alternate tab geometry for the DT 2P plug housings. The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
General Product Description:DEUTSCH DT 2 Position Plug Assembly Capacity IncreaseDescription of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is increasing capacity using a new automated assembly machine for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing are not affected.Reason for Changes:Dear Customer, we hereby inform you of this change. The new assembly process is necessary to better meet our Customers demand needs. The change does not impact connector performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change is being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.First Ship Date of Changed Items (Changed Parts Only):07-AUG-2023
General Product Description:DEUTSCH DT 2 Position Plug Assembly Capacity IncreaseDescription of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is increasing capacity using a new automated assembly machine for the part numbers listed . These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing are not affected.Reason for Changes:Dear Customer, we hereby inform you of this change. The new assembly process is necessary to better meet our Customers demand needs. The change does not impact connector performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change is being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
Description of Changes: The ICT business unit of TE is adding a new source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/generalmarket product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occurwithout request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The change is needed as a result of global demand in excess of PA66 and the available capacity of our suppliers. Theadditional source material does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change isbeing phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
Part Status:
TE Connectivity has extended its DEUTSCH DT range of connectors for use in harsh conditions, introducing a wire-to-wire snap-cap design. This means that the DT 2/3 series now includes three versions: the existing standard version, the welded seal cover, and the new snap-cap design.
APPLICATIONS• Transportation• Marine equipment• Industrial systems• Aerospace and defense equipment
FEATURES• 13A maximum continuous current• 7.5mΩ maximum contact resistance• Improved wire alignment to maximize seal performance under wire side-load conditions• IP67 or IP68 protecting ratings• Operating-temperature range: -55°C to 125°C
On Order
Inventory held at our manufacturer's warehouse. Subject to availability and transit time.
