onsemi | NCP5106ADR2G

The NCP5106 is a High Voltage, High and Low Side Driver.

The NCP5106 is a high voltage gate driver IC providing two outputs for direct drive of 2 N-channel power MOSFETs or IGBTs arranged in a half-bridge  configuration version B or any other high-side + low-side configuration version A. It uses the bootstrap technique to ensure a proper drive of the high-side power switch. The driver works with 2 independent inputs.

Key Features:

• High Voltage Range: Up to 600 V
• dV/dt Immunity ±50 V/nsec
• Negative Current Injection Characterized Over the Temperature Range
• Gate Drive Supply Range from 10 V to 20 V
• High and Low Drive Outputs
• Output Source / Sink Current Capability 250 mA / 500 mA
• 3.3 V and 5 V Input Logic Compatible
• Up to VCC Swing on Input Pins
• Extended Allowable Negative Bridge Pin Voltage Swing to -10 V for Signal Propagation
• Matched Propagation Delays Between Both Channels
• Outputs in Phase with the Inputs
• Independent Logic Inputs to Accommodate All Topologies (Version A)
• Cross Conduction Protection with 100 ns Internal Fixed Dead Time (Version B)
• Under VCC LockOut (UVLO) for Both Channels
• Pin-to-Pin Compatible with Industry Standards
• These are Pb-Free Devices

Applications:

• Half-Bridge Power Converters
• Any Complementary Drive Converters
• Full-Bridge Converters