Free shipping over $100 USD. Conditions apply
Hersteller Artikelnummer
1-967616-1
MQS Series 6 Position 4 mm Black Receptacle Housing Micro Quadlok Connector
| | |||||||||||
| | |||||||||||
| Herstellername: | TE Connectivity | ||||||||||
| Standard Verpackungsart: | Product Variant Information section Verfügbare PaketePaketmenge:1 pro Bag | ||||||||||
| Datencode: | 2509 | ||||||||||
TE Connectivity 1-967616-1 - Produktspezifikation
Versandinformationen:
ECCN:
PCN-Informationen:
***UPDATE OF PCN100680***Description of ChangesThis Product Change Notification (PCN) is to inform about a transfer of tools and/or processes from TE Woert(Germany) to TE Esztergom (Hungary). The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. In case no request is obtained till above mentioned date, PPAP/PSW will be considered as approved and the change is considered as fully released.Reason for Changes:As a result of a thorough analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams.
Description of Change:Manufacturing location change. Following Part Numbers will be transferred from
Description of Changes:Manufacturing location change. Following Part Numbers will be transferred from
Description of ChangesPlease be informed about an agreement product change notification (PCN), futher details can be found in attached presentation.- This Product Change Notification (PCN) is to inform about a capacity enhancement tool for subcomponent (according VDA Trigger matrix No.13 and AIAG section 3.1 item 2 & 5) in an additional to a manufacturing location change from a TE supplier to TE Esztergom (according VDA Trigger matrix No. 29 and AIAG 3,1 item 4).Reason for Changes:Product improvement. As a result of through analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams.
General Product Description:4POS MQS RECDescription of ChangesThis Product Change Notification (PCN) is to inform about a transfer of tools and/or processes from TE Woert(Germany) to TE Esztergom (Hungary). The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. In case no request is obtained till above mentioned date, PPAP/PSW will be considered as approved and the change is considered as fully released.Reason for Changes:As a result of a thorough analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams.
Description of ChangesThis Product Change Notification (PCN) is to inform about a transfer of tools and/or processes from TE Woert(Germany) to TE Esztergom(Hungary. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. In case no request is obtained till above mentioned date, PPAP/PSW will be considered as approved and the change is considered as fully released TN:51-0240615.Reason for Changes:As a result of a thorough analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams.Assembled PNs: X-1452050-Y;X-1452850-Y;X-967360-Y;X-967616-Y,X-967642-Y;X-967678-Y;929469-1;1563458-1.
General Product Description: 3POS MQS REC SEALEDDescription of ChangesThis Product Change Notification (PCN) is to inform about a transfer of tools and/or processes
General Product Description:6POS MQS REC SEALEDDescription of ChangesThis Product Change Notification (PCN) is to inform about a transfer of tools and/or processes from TE Wort(G) to TE Esztergom(H). The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. In case no request is obtained till above mentioned date, PPAP/PSW will be considered as approved and the change is considered as fully released TN:51-0240450.Reason for Changes:As a result of a thorough analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams. Parts from TN: X-967078-Y; X-967360-Y; X-967616-Y; X-967644-Y; X-967678-Y; X-968335-Y; X-968790-Y; 2141938-1; 8000001-1; 929469-1;First Date To Ship (Changed Parts Only): 03-NOV-2023
General Product Description:6POS,MQS,SOCK HSGDescription of ChangesThis Product Change Notification (PCN) is to inform about a transfer of tools and/or processes TE Connectivity Woert (Germany) to TE Connectivity Esztergom (Hungary). The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. In case no request is obtained till above mentioned date, PPAP/PSW will be considered as approved and the change is considered as fully released. Tool:51-1014077Reason for Changes:As a result of a thorough analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams.First Date To Ship (Changed Parts Only):20-JAN-2023
Produktstatus:
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=EU&field16=de&field2=1-967616-1&field4=TE Connectivity&field18=https://p1emea.futureelectronics.com/de/p/interconnect--connectors-rectangular-plastic-industrial/1-967616-1-te-connectivity-5691076
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=EU&field16=de&field2=1-967616-1&field4=TE Connectivity&field18=https://p1emea.futureelectronics.com/de/p/interconnect--connectors-rectangular-plastic-industrial/1-967616-1-te-connectivity-5691076
TE Connectivity 1-967616-1 - Technische Eigenschaften
| No of Positions: | 6 |
| No of Rows: | 2 |
| Contact Termination: | Crimp Terminal |
| Pitch: | 4 mm |
| Style/Orientation: | Receptacle Housing |
| Termination: | Crimp |
| Operating Temp Range: | -40°C to +120°C |
| Material: | Polybutylene Terephthalate |
| Gender: | Female |
| Type: | Receptacle |
| Color: | Black |
Merkmale und Anwendungen
The 1-967616-1 is a 6 Position 4 mm Black Receptacle Housing Micro Quadlok Connector.
Features:
- Product Line = AMPSEAL
- Product Type = Connector
- Connector Type = Housing
- Sealed = Yes
- Number of Positions = 6
- Centerline, Matrix (mm [in]) = 3.50 x 4.0 [.138 x .157]
- Staggered Centerline = With
- Protective Cap = With
- Contact Type = Receptacle
- Tab Contacts = Without
- 2.5mm Pin Diameter Contacts = Without
- Contact Style = MQS
- Number of MQS Contacts = 6
- Connector Style = Receptacle
- Housing Color = Black
- Housing Material = PBT - GF
- Fiber Optic Contacts = Without
Verfügbare Pakete
Paketmenge:
1 pro Bag