Microchip | PIC17C752-33/L

The PIC17C752-33/L is a part of PIC17C series 8-Bit CMOS Microcontroller. It has an operating temperature ranging from -40 °C to +85 °C and comes in PLCC-68 package.

The PIC17C752 features additional timers, 4 capture functions, 3 PWM functions, External Memory Addressing, 12 channels of 10-bit Analog-to-Digital (A/D) converter, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I2C™) bus and 2 Universal Asynchronous Receiver Transmitter (USART).  

Features:

• Microcontroller Core Features:
• Only 58 single word instructions to learn
• All single cycle instructions (121 ns), except for program branches and table reads/writes which are two-cycle
• Operating speed:
• DC - 33 MHz clock input
• DC - 121 ns instruction cycle
• 8 x 8 Single-Cycle Hardware Multiplier
• Interrupt capability
• Peripheral Features:
• Up to 66 I/O pins with individual direction control
• 10-bit, multi-channel Analog-to-Digital converter
• High current sink/source for direct LED drive
• Four capture input pins
• Captures are 16-bit, max resolution 121 ns
• Three PWM outputs (resolution is 1 to 10-bits)
• Special Microcontroller Features:
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
• Brown-out Reset
• Code protection
• CMOS Technology:
• Low power, high speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (3.0 V to 5.5 V)