Les commandes expédiées à l’extérieur des États-Unis seront en attente pendant que l’entreprise évalue les impacts tarifaires.Veuillez contacter votre vendeur pour obtenir de l’aide.
Livraison gratuite aux États-Unis continentaux à partir de 50 $ US. Des conditions s'appliquent
Référence fabricant
MIC5891YN
MIC5891 Series 15V 5MHz Typical Data Input Rate 8Bit Serial-Input Latched Driver
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | Microchip | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :25 par Tube Style d'emballage :PDIP-16 Méthode de montage :Through Hole | ||||||||||
| Code de date: | 2417 | ||||||||||
Microchip MIC5891YN - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
**FPCN97963 UPDATE**Revision History:May 10, 2023: Issued initial notification.June 21, 2024: Issued final notification. Attached the Qualification Report. Revised the Notification Subject to specify all affected device families. Provided estimated first ship date to be on July 19, 2024.Description of Change:Qualification of UNIG as an additional final test site for LM2574, LM2575, MIC2145, MIC2202, MIC2203, MIC2204, MIC2981, MIC4574, MIC4826, MIC4827, MIC4830, MIC4832, MIC4833, MIC5800, MIC5801, MIC5891, MIC58P01 and MIC59P50 device families available in Tube and Tape & Reel packing media.Reason for Change:To improve on-time delivery performance by qualifying UNIG as an additional final test site.
Statut du produit:
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=fr&field2=MIC5891YN&field4=Microchip&field18=https://p1na.futureelectronics.com/fr/de/p/semiconductors--signal-interface--line-driver-or-receiver/mic5891yn-microchip-7664428
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=fr&field2=MIC5891YN&field4=Microchip&field18=https://p1na.futureelectronics.com/fr/de/p/semiconductors--signal-interface--line-driver-or-receiver/mic5891yn-microchip-7664428
Microchip MIC5891YN - Caractéristiques techniques
| Supply Voltage: | 5V |
| Operating Temp Range: | -40°C to +85°C |
| Style d'emballage : | PDIP-16 |
| Méthode de montage : | Through Hole |
Fonctionnalités et applications
The MIC5891 latched driver is a high-voltage, high current integrated circuit comprised of eight CMOS data latches, CMOS control circuitry for the common STROBE and OUTPUT ENABLE, and bipolar Darlington transistor drivers for each latch. Bipolar/MOS construction provides extremely low power latches with maximum interface flexibility. The MIC5891 will typically operate at 5MHz with a 5V logic supply.
The CMOS inputs are compatible with standard CMOS, PMOS, and NMOS logic levels. TTL circuits may be used with appropriate pull-up resistors to ensure a proper logic-high input.
A CMOS serial data output allows additional drivers to be cascaded when more than 8 bits are required.
The MIC5891 has open-emitter outputs with suppression diodes for protection against inductive load transients. The output transistors are capable of sourcing 500mA and will sustain at least 35V in the on-state.
Simultaneous operation of all drivers at maximum rated current requires a reduction in duty cycle due to package power limitations. Outputs may be paralleled for higher load current capability.
The MIC5891 is available in a 16-pin plastic DIP package (N) and 16-pin wide SOIC package (WM).
The MIC5891YN is a high-voltage, high-current latched driver,It comes in DIP16 pkg
Emballages disponibles
Qté d'emballage(s) :
25 par Tube
Style d'emballage :
PDIP-16
Méthode de montage :
Through Hole