
Référence fabricant
DSPIC33CK64MP105-I/PT
dsPIC33CK Series 64 kB Flash 8 kB RAM 100 MHz 16-Bit DSC Controller - LQFP-48
Microchip DSPIC33CK64MP105-I/PT - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Microchip has released a new Errata for the dsPIC3CK64MP105 Family Silicon Errata and Data Sheet Clarification of devicesNotification Status: FinalDescription of Change: 1. Added silicon revision A4.2. Updated silicon issues 19 (Reset) and 20 (Reset).Impacts to Data Sheet: NoneChange Implementation Status: CompleteDate Document Changes Effective: 14 Jun 2022
Microchip has released a new Product Documents for the dsPIC33CK64MP105 Family Silicon Errata and Data Sheet Clarification of devices. Notification Status: FinalDescription of Change: 1) Added silicon issues 19 (Reset) and 20 (Reset).2) Added A2 to affected silicon revisions in silicon issue 17 (I2C). The I2C standard uses the terminology �Master� and �Slave.� The equivalent Microchip terminology used in this document is �Host� and �Client�, respectively.Impacts to Data Sheet: NoneReason for Change: To Improve ProductivityChange Implementation Status: CompleteDate Document Changes Effective: 01 Mar 2022
Notification Status: FinalDescription of Change: This revision incorporates the following updates:1) Sections:a. Updated �Operating Conditions�, �Microcontroller Features�, �Safety Features�, �FunctionalSafety Collateral�, �Qualification Support�, �Pin Diagrams�, Section 5.5 �Flash OTP by ICSP�Write Inhibit�, Section 9.6 �Low-Power RC (LPRC) Oscillator�, Section 16.0 �Serial PeripheralInterface (SPI)�, Section 28.5 �Brown-out Reset (BOR)� and Section 28.7 �JTAG Interface�. b. Added Section 2.5 �External Oscillator Pins�, Section 2.6 �External Oscillator LayoutGuidance� and Section 12.2 �Sampling Time Requirements�.2. Tables:a. Updated Table 4-6 and Table 31-33, Table 31-34, Table 31-35, Table 31-36, Table 31-37,Table 31-38, Table 32-3, Table 32-5, Table 32-6, Table 32-7, Table 32-8, Table 32-9, Table32-10, Table 32-12, Table 32-13, Table 32-14, Table 32-16, Table 32-18 and Table 32-19.3. Figures:a. Updated Figure 1-1, Figure 12-4 and Figure 19-1.4. Registers:a. Updated Register 12-3, Register 12-6, Register 12-12, Register 13-1 and Register 14-2.Impacts to Data Sheet: NoneReason for Change: To Improve ProductivityChange Implementation Status: CompleteDate Document Changes Effective: 20 Oct 2020NOTE: Please be advised that this is a change to the document only the product has not been changed.
Product Category:16-Bit - Microcontrollers and Digital Signal ControllersPCN Type:Document ChangeNotification Subject:ERRATA - dsPIC33CK64MP105 Family Silicon Errata and Data Sheet ClarificationNotification Status: FinalDescription of Change: 1) Added silicon issue 18 (Oscillator). 2) Removed silicon issue 4 (Oscillator) since it is no longerapplicable.Impacts to Data Sheet: NoneReason for Change: To Improve ProductivityChange Implementation Status: CompleteDate Document Changes Effective: 25 Jun 2020NOTE: Please be advised that this is a change to the document only the product has not been changed.
Statut du produit:
Microchip DSPIC33CK64MP105-I/PT - Caractéristiques techniques
Family Name: | dsPIC33CK |
Core Processor: | dsPIC |
Program Memory Type: | Flash |
Flash Size (Bytes): | 64kB |
RAM Size: | 8kB |
Speed: | 100MHz |
No of I/O Lines: | 39 |
InterfaceType / Connectivity: | I2C/I2S/SPI/UART |
Peripherals: | BOR/DMA/PWM/Watchdog |
Number Of Timers: | 1 |
Supply Voltage: | 3V to 3.6V |
Operating Temperature: | -40°C to +85°C |
On-Chip ADC: | 19-chx12-bit |
On-Chip DAC: | 3-chx12-bit |
Watchdog Timers: | 1 |
Style d'emballage : | TQFP-48 |
Méthode de montage : | Surface Mount |
Fonctionnalités et applications
Microchip’s dsPIC33 Digital Signal Controller (DSC) family provides an ideal combination of high Digital Signal Processor (DSP) performance and a microcontroller-like peripheral set for use in efficient power supplies for lighting equipment.
APPLICATIONS
• LED drivers
• Digital power supplies
• Motor-control systems
FEATURES (DSPIC33FJ16):
• 16MIPS DSP performance
– Single-cycle multiply-accumulate function
– 16 x 16 fractional multiply/divide operations
• 16kbytes Flash program memory
• 1kbyte SRAM
• Analog peripherals include:
– 10-bit, 1.1Msamples/s ADC
– Three analog comparators
– Charge time measurement unit
– Supports mTouch™ capacitive touch sensing
• I2C, UART and serial peripheral interfaces
Emballages disponibles
Qté d'emballage(s) :
250 par
Style d'emballage :
TQFP-48
Méthode de montage :
Surface Mount