Manufacturer Part #
MIC384 Series 5.5 V Surface Mount Digital Three-Zone Thermal Supervisor - SOIC-8
|Standard Pkg:|| |
Product Variant Information section
95 per Tube
Microchip has released a new Product Documents for the MIC384 - Three-Zone Thermal Supervisor of devices.Notification Status: FinalDescription of Change: 1) Converted Micrel data sheet MIC384 to Microchip data sheet DS20006469A. 2) Minor grammatical corrections throughout.Impacts to Data Sheet: NoneReason for Change: To Improve ProductivityChange Implementation Status: CompleteDate Document Changes Effective: 16 Dec 2020NOTE: Please be advised that this is a change to the document only the product has not been changed.
|Supply Voltage:||2.7V to 5.5V|
|Operating Temp Range:||-55°C to +125°C|
|Mounting Method:||Surface Mount|
Features & Applications
The MIC384-0YM is a versatile digital thermal supervisor capable of measuring temperature using its own internal sensor and two inexpensive external sensors or embedded silicon diodes such as those found in the Intel Pentium III* CPU. A 2-wire serial interface is provided to allow communication with either I2C** or SMBus* masters.
The open-drain interrupt output pin can be used as either an over-temperature alarm or a thermostatic control signal. Interrupt mask and status bits are provided for reduced software overhead. Fault queues prevent nuisance tripping due to thermal or electrical noise. A programmable address pin permits two devices to share the bus. (Alternate base addresses available – contact Micrel.) Superior performance, low power and small size makes the MIC384-0YM an excellent choice for multiple zone thermal management applications.
*SMBus and Pentium III are trademarks of Intel Corporation.
**I2C is a trademark of Philips Electronics, N.V.
- Measures Local and Two Remote Temperature.
- 2-Wire SMBus-compatible Interface.
- Programmable Thermostat Settings for All Three Zones.
- Open-Drain Interrupt Output Pin.
- Interrupt Mask and Status Bits.
- Fault Queues to Prevenr Nuisance Tripping.
- Low Power Shutdown Mode.
- Failsafe response to diode faults.
- 2.7 V to 5.5 V Power Supply Range.
- 8-Lead SOIC and MSOP Packages.
- Desktop, Server and Notebook Computers.
- Power Supplies.
- Test and Measurement Equipment.
- Wireless Systems.
- Networking/Datacom Hardware.
95 per Tube