Manufacturer Part #
MCP23009-E/SO
MCP23009 Series 5.5 V 3.4 MHz 8-Bit I/O Expander with Open-Drain Output -SOIC-18
| | |||||||||||
| | |||||||||||
| Mfr. Name: | Microchip | ||||||||||
| Standard Pkg: | Product Variant Information section Available PackagingPackage Qty:42 per Tube Package Style:SOIC-18 Mounting Method:Surface Mount | ||||||||||
| Date Code: | |||||||||||
Microchip MCP23009-E/SO - Product Specification
Shipping Information:
ECCN:
PCN Information:
Initial Notice: Qualification of palladium coated copper (PdCu) bond wire and 3280 die attach epoxy in selected products of the 150K and 160K wafer technologies available in 18L SOICDescription of Change:Qualification of palladium coated copper (PdCu) bond wire and 3280 die attach epoxy in selected products of the 150K and 160K wafer technologies available in 18L SOIC package at MTAI assembly site.Pre Change: Gold wire and 8390A die attach epoxyPost Change: PdCu wire and 3280 die attach epoxyReason for Change:To improve manufacturability and qualify PdCu bond wire at MTAI assembly site.
Part Status:
Microchip MCP23009-E/SO - Technical Attributes
| Interface Type: | I2C |
| No of Channels: | 1 |
| Clock Frequency-Max: | 3.4MHz |
| No of I/O Lines: | 8 |
| Supply Voltage-Nom: | 1.8V to 5.5V |
| Supply Current: | 1mA |
| Package Style: | SOIC-18 |
| Mounting Method: | Surface Mount |
Features & Applications
The MCP23X09 device provides 8-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface.
The MCP23X09 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding input or output register. The polarity of the input port register can be inverted with the polarity inversion register. All registers can be read by the system master.
Features:
- 8-bit remote bidirectional I/O port:
- I/O pins default to input
- Open-drain outputs:
- 5.5V tolerant
- 25 mA sink
- 200 mA total
- Low standby current as low as 1 μA
- High-speed I2C™ interface: 100 kHz, 400 kHz,3.4MHz
- Single hardware address pin: Voltage input to allow up to eight devices on the bus
- Configurable interrupt output pins: Configurable as active-high, active-low or open-drain
- Configurable interrupt source: Interrupt-on-change from configured defaults or pin change
- Polarity inversion register to configure the polarity of the input port data
- External reset input
Available Packaging
Package Qty:
42 per Tube
Package Style:
SOIC-18
Mounting Method:
Surface Mount