Orders shipping outside of United States will be on hold while the company evaluates tariff impacts.Please contact your salesperson for assistance.
Free shipping within the continental US over $50. Conditions apply
Manufacturer Part #
L297/1
L297 Series 10 V 4 Output Half/Full Mode Stepper Motor Controller - DIP-20
| | |||||||||||
| | |||||||||||
| Mfr. Name: | STMicroelectronics | ||||||||||
| Standard Pkg: | Product Variant Information section Available PackagingPackage Qty:20 per Tube Package Style:DIP-20 Mounting Method:Through Hole | ||||||||||
| Date Code: | 2406 | ||||||||||
STMicroelectronics L297/1 - Product Specification
Shipping Information:
ECCN:
PCN Information:
Part Status:
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=en&field2=L297/1&field4=STMicroelectronics&field18=https://p1na.futureelectronics.com/p/semiconductors--analog--drivers--motor-drivers/l297-1-stmicroelectronics-3786548
- https://futureelec.wufoo.com/forms/?formname=r8bzou01ws8brs&field12=NA&field16=en&field2=L297/1&field4=STMicroelectronics&field18=https://p1na.futureelectronics.com/p/semiconductors--analog--drivers--motor-drivers/l297-1-stmicroelectronics-3786548
STMicroelectronics L297/1 - Technical Attributes
| Motor Type: | Stepper |
| No of Outputs: | Quad |
| Supply Current: | 50mA |
| Rated Power Dissipation: | 1W |
| Supply Voltage-Max: | 7V |
| Supply Voltage: | 4.75V to 7V |
| Operating Temp Range: | -40°C to +150°C |
| Package Style: | DIP-20 |
| Mounting Method: | Through Hole |
Features & Applications
The L297/1 is a Stepper Motor Controller IC generates four phase drive signals for two phase bipolar and four phase unipolar step motors in microcomputercontrolled applications. The motor can be driven in half step, normal and wawe drive modes and onchip PWM chopper circuits permit switch-mode control of the current in the windings.
A Feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor, and the programmer, is greatly reduced. Mounted in DIP20 and SO20 packages, the L297 can be used with monolithic bridge drives such as the L298N or L293E, or with discrete transistors and darlingtons.
Features:
- Normal/Wave Drive
- Half/Full Step Modes
- Clockwise/Anticlockwise Direction
- Switchmode Load Current Regulation
- Programmable Load Current
- Few External Components
- Reset Input & Home Output
- Enable Input
Available Packaging
Package Qty:
20 per Tube
Package Style:
DIP-20
Mounting Method:
Through Hole
