Manufacturer Part #
MIC2164 Series 3 mA 1.25 MHz Surface Mount Synchronous Buck Controller - MSOP-10
|Standard Pkg:|| |
Product Variant Information section
100 per Tube
Description of Change:Release to production of listed Micrel Controller product type manufactured with the BCD05 process technology to Fabrication site (FAB 5).Pre Change:Fabricated at Micrel fabrication site (San Jose, CA, USA) (SJ) using 6 inch wafers.Post Change:Fabricated at Atmel Fabrication site FAB 5 (Colorado Springs, CO, USA) (COS) using 6 inch wafersReason for Change:To improve productivity with the closure of the Micrel fab (SJ) as part of the integration of Micrel and Microchip.
|Supply Voltage:||3V to 28V|
|Mounting Method:||Surface Mount|
Features & Applications
The MIC2164-3YMM is a constant frequency, synchronous buck controller featuring adaptive on-time control. The MIC2164/-2/-3 are the first products in the new Hyper Speed ControlTM family of buck controllers introduced by Micrel. The MIC2164/-2/-3 controllers operate over an input supply range of 3 V to 28 V, and are independent of the IC supply voltage.
The devices are capable of supplying 25 A output current. While the MIC2164 operates at 300 kHz, the MIC2164-2 operates at 600 kHz, and the MIC2164-3 operates at 1 MHz. A unique Hyper Speed ControlTM architecture allows for ultrafast transient response while reducing the output capacitance and also makes High VIN/Low VOUT operation possible. The MIC2164/-2/-3 controllers utilizes an architecture which is adaptive Ton ripple controlled. A UVLO feature is provided to ensure proper operation under power-sag conditions to prevent the external power MOSFET from overheating. A soft start feature is provided to reduce the inrush current. Foldback current limit and “hiccup” mode short-circuit protection ensure FET and load protection. The MIC2164/-2/-3 controllers are available in a 10-pin MSOP (MAX1954A compatible) package with a junction operating range from –40°C to +125°C.
- Hyper Speed ControlTM architecture enables.
- High delta V operation (VIN=28 V and VOUT=0.8 V).
- Smaller output capacitors than competitors.
- 3 V to 28 V input voltage.
- Stable with zero-ESR output capacitor.
- 25 A output current capability.
- 300 kHz/600 kHz/1MHz switching frequency.
- Adaptive on-time mode control.
- Output down to 0.8 V with ±1% FB accuracy.
- Up to 95% efficiency.
- Foldback current limit and “hiccup” mode short-circuit protection.
- 6 ms Internal soft start.
- Thermal shutdown.
- Pre-bias output safe.
- –40°C to +125°C junction temperature range.
- Available in 10-pin MSOP package.
- Set-top box, gateways and routers.
- Printers, scanners, graphic cards and video cards.
- Telecommunication, PCs and servers.
- Microprocessor core supply.
- Low-voltage distributed power.
100 per Tube