Microchip | PIC18LF2320-I/SO

Ideal for connectivity applications that benefit from the availability of the double asynchronous serial port, the flexible synchronous serial port (I²C or SPI) as well as large amounts of RAM buffer memory and Flash program memory. These include instrumentation panels, TCP/IP enabled embedded applications as well as metering and industrial control and monitoring applications.

Features:

• Low-Power Features:
• Power Managed modes:
• Run: CPU on, peripherals on
• Idle: CPU off, peripherals on
• Sleep: CPU off, peripherals off
• Power Consumption modes:
• PRI_RUN: 150 µA, 1 MHz, 2 V
• PRI_IDLE: 37 µA, 1 MHz, 2 V
• SEC_RUN: 14 µA, 32 kHz, 2 V
• Oscillators:
• Four Crystal modes:
• LP, XT, HS: up to 25 MHz
• HSPLL: 4-10 MHz (16-40 MHz internal)
• Two External RC modes, up to 4 MHz
• Two External Clock modes, up to 40 MHz
• High current sink/source 25 mA/25 mA
• Three external interrupts
• Up to 2 Capture/Compare/PWM (CCP) modules:- Capture is 16-bit, max. resolution is 6.25 ns (TCY/16)
• Compare is 16-bit, max. resolution is 100 ns (TCY)
• PWM output: PWM resolution is 1 to 10-bit
• Special Microcontroller Features:
• 100,000 erase/write cycle Enhanced Flash program memory typical
• 1,000,000 erase/write cycle Data EEPROM memory typical
• Flash/Data EEPROM Retention: > 40 years
• Self-programmable under software control
• Priority levels for interrupts
• 8 x 8 Single-Cycle Hardware Multiplier