Livraison gratuite aux États-Unis continentaux à partir de 50 $ US. Des conditions s'appliquent
Les commandes expédiées à l’extérieur des États-Unis seront en attente pendant que l’entreprise évalue les impacts tarifaires.Veuillez contacter votre vendeur pour obtenir de l’aide.
Référence fabricant
DT06-3S-P006
DEUTSCH DT Series 3 Position Dual Row Female Socket Free Hanging Plug Housing
|
|
|||||||||||
|
|
|||||||||||
| Nom du fabricant: | TE Connectivity | ||||||||||
| Emballage standard: |
Product Variant Information section
Emballages disponiblesQté d'emballage(s) :1 par Box Méthode de montage :Wire Mount |
||||||||||
| Code de date: | 2319 | ||||||||||
TE Connectivity DT06-3S-P006 - Spécifications du produit
Informations de livraison:
Code HTS:
ECCN:
Informations PCN:
Description of Change:The Industrial and Commercial Transportation business unit of TE Connectivity is implementing a minor drawing revision to reinstate the laser marking on the cap. This marking was inadvertently omitted in the previous release (PCN-24-210155).Reason for Change:The change is necessary to reinstate the laser marking on the cap.
Description of Change:The Industrial and Commercial Transportation business unit of TE Connectivity is making a change to migrate our integrated resistor connectors to the stamped and formed type contacts of the DT product family for the part number listed. Reason for Change:The change is necessary to standardize our integrated resistor portfolio into the stamped and formed contact design.
General Description of Changes: The Industrial and Commercial Transportation business unit of TE Connectivity is transferring component(s) of the following part number(s) from State Industrial Tucson AZ, USA to Global Hi-Tek Guangdong China. These PNs are customer restricted designs and require customer approval before shipment. Please provide us with your immediate approval to prevent shipment delays. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved.Reason for Changes: Dear Customer, we hereby inform you of this change. This change is necessary for TE supplier consolidation. The change will not impact connector performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
General Description of Changes: The Industrial and Commercial Transportation business unit of TE Connectivity is standardizing the DT integrated resistor receptacle housings and caps to snap geometry (without latch protection for the PE01 mod). This change ensures a cohesive product with consistent aesthetics across the product line as their housings and caps will migrate from our ultrasonic welding geometry to our snap geometry for the part number(s) listed below. This geometry migration will result in an increase of 0.064 inches on the 3P plugs and receptacles, the 2P receptacles will keep their dimensions. The color of the cap change to black can be referenced through PCN-23-192205. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are affected.Reason for Changes: Dear Customer, we hereby inform you of this change. The change is necessary to standardize the design of our integrated component connectors (resistors) to the snap-cap style. The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
Product Description: DEUTSCH DT series Plug and Receptacle short cap and long cap change to black General Description of ChangesAs part of our ongoing efforts to reduce carbon footprint, the Industrial and Commercial Transportation business unit of TE Connectivity is standardizing the weld cap color of the Deutsch DT connectors to black (affected part numbers listed below). The standardized black weld caps will seamlessly integrate with the developing design features when new DT colors are added to our connector portfolio. This ensures a cohesive product with consistent aesthetics across the product line. These PNs are TE proprietary designs and, therefore, considered catalog/general market products. Level 4 PPAP requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will only occur with a request. Because all of the components are currently used in production, no samples are planned to be supplied because the change is entirely cosmetic, as a result, level 4 PPAP (PSW only) will be provided when requested, and disposition response is required within 14 days of the submit date or it will be considered approved. Product drawing(s) are affected.Reason for Changes:Dear Customer, we hereby inform you of this change. As part of our ongoing efforts to reduce our carbon footprint, we are standardizing the color of the weld caps to black across our entire DT connector portfolio. The change does not impact performance. IMPORTANT: In the field, current and prior revisions of these parts can be utilized interchangeably. The update is being implemented gradually, and earlier revisions can remain stocked until use. Shipments of both configurations may be mixed.
Description of Changes: The ICT business unit of TE is adding a new source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/generalmarket product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occurwithout request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The change is needed as a result of global demand in excess of PA66 and the available capacity of our suppliers. Theadditional source material does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change isbeing phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
Statut du produit:
TE Connectivity DT06-3S-P006 - Caractéristiques techniques
| Méthode de montage : | Wire Mount |
Fonctionnalités et applications
TE Connectivity has extended its DEUTSCH DT range of connectors for use in harsh conditions, introducing a wire-to-wire snap-cap design. This means that the DT 2/3 series now includes three versions: the existing standard version, the welded seal cover, and the new snap-cap design.
APPLICATIONS
• Transportation
• Marine equipment
• Industrial systems
• Aerospace and defense equipment
FEATURES
• 13A maximum continuous current
• 7.5mΩ maximum contact resistance
• Improved wire alignment to maximize seal performance under wire side-load conditions
• IP67 or IP68 protecting ratings
• Operating-temperature range: -55°C to 125°C
Emballages disponibles
Qté d'emballage(s) :
1 par Box
Méthode de montage :
Wire Mount