Microchip | SST39VF1602-70-4C-EKE

The SST39VF1602-70-4C-EKE is a part of SST39VF Series Multi-Purpose Flash Plus. It has an standard operating temperature ranging from  -40°C to +85°C, it comes in a TSOP-48 package.
 
The SST39VF1602 device is 1M x16 CMOS Multi-Purpose Flash Plus (MPF+) manufactured with SST proprietary, high performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

Features:

• Organized as 1M x16: SST39VF1601C/1602C
• Single Voltage Read and Write Operations: 2.7-3.6 V
• Superior Reliability
  • Endurance: 100,000 Cycles (Typical)
  • Greater than 100 years Data Retention
• Low Power Consumption (typical values at 5 MHz)
  • Active Current: 9 mA (typical)
  • Standby Current: 3 μA (typical)
  • Auto Low Power Mode: 3 μA (typical)
• Hardware Block-Protection/WP# Input Pin
  • Top Block-Protection (top 8 KWord)
  • Bottom Block-Protection (bottom 8 KWord)
• Sector-Erase Capability
  • Uniform 2 KWord sectors
• Block-Erase Capability
  • Flexible block architecture; one 8-, two 4-, one 16-, and thirty one 32-KWord blocks
• Chip-Erase Capability
• Erase-Suspend/Erase-Resume Capabilities
• Hardware Reset Pin (RST#)
• Latched Address and Data
• Security-ID Feature
  • SST: 128 bits; User: 128 bits
• Fast Read Access Time: 70 ns
• Automatic Write Timing
  • Internal VPP Generation
• End-of-Write Detection
  • Toggle Bits
  • Data# Polling
• CMOS I/O Compatibility
• JEDEC Standard
  • Flash EEPROM Pinouts and command sets