text.skipToContent text.skipToNavigation
Product Variant Information section
Product Specification Section
Pricing Section

Stock : 6 755

Sur commande :Order inventroy details 7 075
Stock d'usine :Stock d'usine : 28 550
Délai d'usine : 8 Semaines
Commande minimale : 1
Multiples de : 1
Quantité Prix Internet
1 $1.98
26 $1.65
100+ $1.50
Total :

1,98 $

USD
Attributs
Attributes Table
No of Outputs Eight
Output Voltage-Max 50V
Output Current-Max 0.5A
Fonctionnalités et applications

 

The MIC5891 latched driver is a high-voltage, high current integrated circuit comprised of eight CMOS data latches, CMOS control circuitry for the common STROBE and OUTPUT ENABLE, and bipolar Darlington transistor drivers for each latch. Bipolar/MOS construction provides extremely low power latches with maximum interface flexibility. The MIC5891 will typically operate at 5MHz with a 5V logic supply.

The CMOS inputs are compatible with standard CMOS, PMOS, and NMOS logic levels. TTL circuits may be used with appropriate pull-up resistors to ensure a proper logic-high input.

A CMOS serial data output allows additional drivers to be cascaded when more than 8 bits are required.

The MIC5891 has open-emitter outputs with suppression diodes for protection against inductive load transients. The output transistors are capable of sourcing 500mA and will sustain at least 35V in the on-state.

Simultaneous operation of all drivers at maximum rated current requires a reduction in duty cycle due to package power limitations. Outputs may be paralleled for higher load current capability.

The MIC5891 is available in a 16-pin plastic DIP package (N) and 16-pin wide SOIC package (WM).

The MIC5891YN is a high-voltage, high-current latched driver,It comes in DIP16 pkg