Référence fabricant
TSC103IDT
TSC103 Series 5.5 V 700 kHz High-Side Current Sense Amplifier SMT - SOIC-8
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | STMicroelectronics | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :2500 par Cut Tape Style d'emballage :SOIC-8 Méthode de montage :Surface Mount | ||||||||||
| Code de date: | 2146 | ||||||||||
Product Specification Section
STMicroelectronics TSC103IDT - Spécifications du produit
Informations de livraison:
L'article ne peut être envoyé à certains pays. Voir la liste
L'article ne peut pas être envoyé aux pays suivants:
ECCN:
EAR99
Informations PCN:
N/A
Fichier
Date
Statut du produit:
Actif
Actif
STMicroelectronics TSC103IDT - Caractéristiques techniques
Attributes Table
| Amplifier Type: | Current Sense |
| No of Channels: | 2 |
| 3dB Bandwidth-Min: | 700kHz |
| Slew Rate-Nom: | 0.6V/µs |
| Input Offset Voltage-Max: | 500µV |
| Average Bias Current-Max: | 15µA |
| Supply Voltage: | 2.7V to 5.5V |
| Common Mode Rejection Ratio: | 105dB |
| Supply Current: | 300µA |
| Output Type: | Analog |
| Power Supply Rejection Ratio: | 95dB |
| Operating Temp Range: | -40°C to +125°C |
| DC Voltage Gain: | 40dB |
| Low Noise: | 40nV/√Hz |
| Output Current: | 26mA |
| Moisture Sensitivity Level: | 1 |
| Style d'emballage : | SOIC-8 |
| Méthode de montage : | Surface Mount |
Fonctionnalités et applications
The TSC103IDT measures a small differential voltage on a high-side shunt resistor and translates it into a ground-referenced output voltage. The gain is adjustable to four different values from 20 V/V up to 100 V/V by two selection pins. Wide input common-mode voltage range, low quiescent current, and tiny TSSOP8 packaging enable use in a wide variety of applications.
Features:
- Independent supply and input common-mode voltages
- Wide common-mode operating range: 2.9 to 70 V in single-supply configuration
-2.1 to 65 V in dual-supply configuration - Wide common-mode surviving range:
-16 to 75 V (reversed battery and load-dump conditions) - Supply voltage range:
2.7 to 5.5 V in single-supply configuration - Low current consumption: ICC max = 360 µA
- Pin selectable gain: 20 V/V, 25 V/V, 50 V/V or 100 V/V
- Buffered output
Applications:
- Automotive current monitoring
- DC motor control
- Photovoltaic systems
- Battery chargers
- Precision current sources
- Current monitoring of notebook computers
- Uninterruptible power supplies
- High-end power supplies
View the Complete family of TSC103 Amplifiers
Pricing Section
Stock global :
43
États-Unis:
43
Product Variant Information section
Emballages disponibles
Qté d'emballage(s) :
2500 par Cut Tape
Style d'emballage :
SOIC-8
Méthode de montage :
Surface Mount