Microchip | SST39VF1601C-70-4C-B3KE

NOTE: This SST product is migrating to the preferred Microchip (MCP) part number. All products bearing the Microchip part number are identical in form, fit and function to the products with the legacy SST prefix/logo mark.

The SST39VF1601C-70-4C-B3KE is a part of SST39VF Series Multi-Purpose Flash Plus. It has an standard operating temperature ranging from  -40°C to +85°C, it comes in TFBGA-48 package.
 
The SST39VF1601C device is 1M x16 CMOS Multi-Purpose Flash Plus (MPF+) manufactured with SST proprietary, high performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

Features:

• Organized as 1M x16: SST39VF1601C/1602C
• Single Voltage Read and Write Operations: 2.7-3.6 V
• Superior Reliability
• Endurance: 100,000 Cycles (Typical)
• Greater than 100 years Data Retention
• Low Power Consumption (typical values at 5 MHz)
• Active Current: 9 mA (typical)
• Standby Current: 3 µA (typical)
• Auto Low Power Mode: 3 µA (typical)
• Hardware Block-Protection/WP# Input Pin
• Top Block-Protection (top 8 KWord)
• Bottom Block-Protection (bottom 8 KWord)
• Sector-Erase Capability
• Uniform 2 KWord sectors
• Block-Erase Capability
• Flexible block architecture; one 8-, two 4-, one 16-, and thirty one 32-KWord blocks
• Chip-Erase Capability
• Erase-Suspend/Erase-Resume Capabilities
• Hardware Reset Pin (RST#)
• Latched Address and Data
• Security-ID Feature
• SST: 128 bits; User: 128 bits
• Fast Read Access Time: 70 ns
• Automatic Write Timing
• Internal VPP Generation
• End-of-Write Detection
• Toggle Bits
• Data# Polling
• Ready/Busy# Pin
• CMOS I/O Compatibility
• JEDEC Standard
• Flash EEPROM Pinouts and command sets

View the complete SST39VF Series of Multi-Purpose Flash