STMicroelectronics | STM32F100RCT6BTR

The STM32F100RCT6BTR is a high-performance advanced ARM Cortex™-M3 32-bit RISC microcontroller. It has a core operating frequency of 24 MHz  with high-speed embedded memories and an extensive range of enhanced peripherals, I/Os.

It operating voltage ranging from 2.0 to 3.5 V, and offer standard communication interfaces with comprehensive set of power-saving modes, which allows the design for low-power applications.

Features:

• Core: ARM 32-bit Cortex™-M3 CPU:
  • 24 MHz maximum frequency,
  • 1.25 DMIPS/MHz (Dhrystone 2.1) performance
  • Single-cycle multiplication and hardware division
• Memories:
  • 16 to 128 Kbytes of Flash memory
  • 4 to 8 Kbytes of SRAM
• Clock, reset and supply management:
  • 2.0 to 3.6 V application supply and I/Os
  • POR, PDR and programmable voltage detector (PVD)
  • 4-to-24 MHz crystal oscillator
  • Internal 8 MHz factory-trimmed RC
  • Internal 40 kHz RC
  • PLL for CPU clock
  • 32 kHz oscillator for RTC with calibration
• Low power:
  • Sleep, Stop and Standby modes
  • VBAT supply for RTC and backup registers
• Debug mode:
  • Serial wire debug (SWD) and JTAG interfaces
• DMA:
  • 7-channel DMA controller
  • Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs
• 1 × 12-bit, 1.2 μs A/D converter (up to 16 channels):
  • Conversion range: 0 to 3.6 V
  • Temperature sensor
• 2 × 12-bit D/A converters
• Up to 80 fast I/O ports
• Up to 12 timers
• Up to 8 communications interfaces
• CRC calculation unit, 96-bit unique ID
• ECOPACK® packages

Applications:

• Industrial
• Automotive